Search results

I run it without the air filter but still the same. however when it start now it has no power at all, see attached

there is filter in the system in the system which I did bleed today. there is a lot of black stuff came out. see pic. this might be block. how do I check whether or not the diverter valve is faulty.

the display show the temperature which is 90 degrees and keep fluctuating between 90 and 88 however, as soon as I open the hot water tap. I get very hot water, (you can not even touch it) for few second all the rad have normal control manually operated and all open, no trvs

do you mean the blue and the black ones that are located inline on the same pipe

I do not think so but here is a pic

just did, and set up the wall thermostat trematurid to 30, the temperature inside the house was 19 and boiler still doing the same; the ch light is lit on the temperature control the flame is also on briefly but none of the radiators get warm.

this one

the DHW is working without any issue but the ch is not. when there a demand for ch, the central heating orange light idslit on the boiler, and the pump is working but no flame and no circulation. what could be the reasons?

my mower start and cuts short grass without any issues. however, as soon as it hit long grass it cuts off. any idea why?

I bought new PVC back door that opens outward and fitted it myself. the frame is plumed all round. The door closes with no issues. however, the sash is not sitting squarely inside the frame. I had hoped to get good 8mm all round the sash but it is not. The worse, corner is the left bottom...

the pilot flame of Worcester 9.24 , does not stay is it the thermocouple or the gas valve. this very old boiler but it has been very good and reliable

any idea how to connect the bath (which on the right hand side of the attached pic) with the basin (in the middle) to the toilet which will be to the left. my idea to run 40mm pipe from the bath and T Junction the basin to it (with 32 to 40 reducer) then boos it to the brown (the toilet 4"...

Do I need moister resistance plaster board for the ceiling and the walls of the kitchen and the bathroom or just the walls? And what thickness?

trying to find them

the brackets of one of the radiators, see pic, came out of the stud wall. it was fixed to the plasterboard. Any idea how to fix it back. the other side of the wall is another plasterboard. this is 4 inch stud wall in-between two rooms

what sort of underlay to use on top of the screened floor that has underfloor heating before fitting the laminate flooring

plasterboard thickness for ceiling, is it 15mm or 12.5mm

I am looking for something like this which an be fleshed with the ceiling, but I need help with the size...

this is the best option I was told by an electrician

I built two story extension 7x6.5 m. it has been divided into 4 spaces each space size is 6x3.3 m and will contain 5 down light each what is the best LED downlight that I can used in terms of watt and the ceiling hole size?