Search results

My problem is that She Who Must Be Obeyed doesn't want any kind of surround but thank you anyway.

This mirror has done about 8 years and so I guess it was probably one without the waterproof layer on the back. With regard to the fixings it would be nice to be able to use the existing screws in the wall if I could.

Thank you for that. I knew I would have to buy a new mirror, it is the backing off the bevilled edge of our mirror which is disappearing. But I wondered if it is possible to buy new brackets etc. rather than trying to prise the old ones off with a screwdriver. I have thought that if I go down...

Our old bathroom mirror has gone manky. I would like to fit something similar and specifically with a shelf underneath as per the existing (see pics.) Is it possible to buy new fixing brackets and stick them onto the rear of a new mirror or even take the old ones off and attach them to a new...

I just would like to say a huge thank you to all who have persevered with me over this problem and who have helped me tremendously. Today I installed the MV ( which I should now admit that I've had on the shelf since 2005 ! ) and the HW part of our system is now working as it should. May I wish...

You beat me to it - see above. Me & lecky don't get on very well. You can't see the damn stuff coming. Thank you for your concern. I appreciated that.

Thank you. I hope to be able to try it tomorrow as long as the Head Gardener allows me to switch the lecky off. It's Christmas time and she's cooking for the 5000 I think, at least it looks like that. She does it every year. :D I'm not 100% sure what switch/fuse controls the MV and so I'm...

Not sure if I've had some good luck or not. The following are 2 images of the existing MV. One is the motor (and no info. on there that is helpful ) and the other is the label on top of the box. Then I found a new MV that I have in stock ! Will this replace the faulty one ?

Thank you Gentlemen. I think we'll have the immersion on for the few days until I can replace the Honeywell motor head for the valve. Will hopefully have time today to take the cover off and determine which motor I need. It's obviously 240V, are they all the same for 2 way valves or are there...

Just got up to make the tea and discovered (I think) that what I thought was the MV for the HW is in fact one for the heating. So I have opened the valve on the correct HW valve and am getting heat on the top side of the pipe. If I leave the valve open on this MV until I can get a new Syncron...

They haven't all failed. The CH is working as it should. It's just the HW that isn't working and the more I think about it the more I think that it's the MV that is at fault.

Have just watched a helpful video on YouTube. Are Honeywell synchron motors all the same or do I need to take the cover off and find a number ?

I am getting the impression that you are quietly confident that the problem is that the valve has failed in which case, if I can find the correct innards for the valve I can fix it myself. Are Honeywell MVs all the same inside or do I need to take the cover off first to get a number ?

Sorry but after thinking about it I am still bewildered. If, as you both say, the HW won't kick in until the heating does then how does the system cope when the heating is turned off, say in a very hot period in the Summer ? The HW still comes on in those conditions.

Yes, got that now. The Honeywell MVs on the system are 9-10 years old. Can the innards still be purchased ? I am having difficulty seeing a number on the box that covers them. It's all dark in there now and I will have to have a decent look tomorrow morning. Are all MVs serviceable like this ?

Yes, that is what I intend to do tomorrow morning. If that doesn't point to the MV being caput then it's time for the heating boys I think. If I can get the HW to work then I'll investigate the MV and see if it takes apart alright. I seem to remember that last time I changed a MV I just took the...

Ah, now I understand ( I think ! ) Thank you. Have had our showers now and have switched the immersion off. Tomorrow morning I will open the MV for the HW manually and then press Extra hour on both the heating system and on the HW system. That should show me if the MV for the HW is working...

Thank you Gentlemen. But I actually don't understand this. Our HW is timed to come on a 4pm. The CH is timed to come on at 6pm. Surely the HW can come on without having to give the CH a kick ? Sorry if I'm being a bit thick. And yes, they are Honeywell MVs. Let me try and clarify. I am...

After showers this evening I am going to switch the immersion heater off and then tomorrow morning I will open what I think is the MV for the hot water and see if I can get the boiler to kick in. I have replaced MVs before but a long time ago. Amd I correct in thinking that it's just the guts of...

But I thought that if I latched all 3 valves open (to make sure that I've got the hot water one open) and played with the programmer I could get the hot water to kick in but just had another thought. I've had the immersion heater switched on since this morning and so maybe the water temperature...