Search results

Hi guys, I am looking to buy a 240V Jigsaw for my DIY projects. Can you please recommend which ones are the best for around £50 budget? Thanks,

Thanks guys, Do you know how do I take the measurements of this sprandel panle? Brick to brick is simple, but what about the pannel and how big the windows should be? Do I just make it +- 3 cm, or there are some methods on measuring it? Thanks,

Thanks Freddy, Can I buy two UPVc windows and a separate panel? Or do I need to buy a big (long) window as one piece? Thanks,

There are bricks behind that panel, i.e. from inside the room there is a brick wall between the windows. That is why I am confused about this panel.

Thanks, I have recently bought this house and had a home owners (more detailed) survey done, it did not mention any asbestos. In adition, I will not be removing it, I just want to cover it.

Hi Guys, I am going to replace my wooden windows with UPVc ones. Between the windows (see picture) I have a gap which is not brick and not tile, it is some unknown stuff, probably a cement board. What can I use to cover this gap? Some plastic panel or similar, can you please recommend...

A lot of BBQing indeed, but I will use it as an outside cooker as well. During the summer when it is too hot to cook inside, an outside BBQ with a side burner works like a charm :-)

That is probably another question I will need to find out about :-) Is it possible to lay the pipe without connecting the grill now? Will I need a GasSafe certified professional when I will be connecting the actual grill to the pipe outlet in the garden?

Thanks, I am sure you can get them, worst case you can buy them from the US and pay £200 shipment cost.

Thanks Dan, what is this specific certificate called? WHat do I tell Gas Safe when I call them? Thanks,

Hi guys, Do you know if it is possible to bring the mains Gas pipe into the garden to use with the Natural Gas BBQ? What do regultions say about this? I am going to do some referbs in my house and can dig the concrete floor to lay the pipe from the gas meter into the garden. Will use a...

Thanks, I will do that. But wouldn't it tear apart somwhere else? As it will not have any space to relase the pressure?

Hi, Thanks for your reply. Yes, I can add some screws, just drive a few more screws into the plasterboard and joists?

Hi Guys, Plasterboard Ceiling in my rooms keeps cracking between the joints. I did try fixing it by adding the fiber joint tape and then plastering over with EasyFill. But over a year (SUmmer/Winter) it keeps cracking. Is there anything I can do to stop it from cracking? Thanks,

Hi Guys, I have an old plasterboard ceiling in the sitting room, want to repalce it with something modern and nice. Can you recommend please what can be used? Thanks,

Hi Guys, I need to sand wals in one room, can you recommend which sander should I buy? I need something that will do the job and will not be too expensive. Will somethig like "Black & Decker KA300" do the job? Also, do I need to buy special sanding sheets? Or can I just buy standard...

Just an update, The valve started working when I installed it into the tank. I had to submerge it for a few seconds after installing, and then it worked just fine. Not sure why, maybe it requires some water around the diafragm to start working, or maybe as it was mentioned it needs and...

So if I have a low water pressure, does it mean it may not even shut off? The toilet is on the first floor and I have the tank on the rooh, i.e. around 2 meter abowe the valve. Thanks,

Thanks all, I will try installing it into the tank tonight, to see if it shuts by the water level. Should it be shutting if I test it with the air? FOr example if I blow into the water inlet pipe and lift the float manually, should it be shutting? Does anybody know if Fluidmaster is...