Search results

Thanks, but I have looked closely and I can’t see any setting buttons/controls on it at all! Seems to be a very basic (or fiendishly clever)! model, that’s why I say I can’t find any similar ones on the net.

I see there are several threads on this but my particular case doesn’t seem to be covered… I took the light down while some building work was done and on putting it back in the same place it comes on when it gets dark but stays on. I have tried the various re-set tips but they haven’t improved...

Thanks, as I said earlier I don't know the manufacturer - and I have had a good look all over the units. I also understand how to correct the problem by adjusting the fixing brackets on the appliance doors if that is what you mean, but having taken the doors off and felt the weight of them I...

The cabinets are not old, it is a Sheraton kitchen fitted April 2017. The fridge freezer is older though if that's what you are referring to. After reading all replies and due to the weight of the cabinet door, I'm inclined to think the cabinet door should be fixed (hinged) to the cabinet frame...

Here are some photos - the door supplied has no cutouts for hinges but I guess that was the fitter's choice

Thanks, that sounds like good advice... As I say though the whole arrangement is supported by the fridge door hinges at the moment so any additional hinges would be from cabinet door to surrounding frame and I might have difficulty in getting them to work smoothly with the fridge ones. Plus...

Sorry, don't know, they came with the house and I can't see any maker's name - they seem decent though. There are fixing brackets and adjusting screws top and bottom of the FF doors to take the cabinet doors. When you open the cabinet door the FF opens too (obviously). This sort of arrangement...

We had a kitchen fitted just under a year ago, it was done well but the new doors attached to our integrated fridge freezer have dropped a little and started to rub on adjacent units. Having taken the top section door off I see it is extremely heavy and in my view too heavy for the hinges on the...

Apologies for butting in but this sounds very similar to my problem so I thought maybe better not to start another thread - I too have water ingress at bottom corners of window upstairs, ruining window board and plaster locally. I poured 2 litres of water on the bottom of the frame near the...

Update: found thread re. similar problem. Seems to be defective programmer, it might be cured by turning off the display backlight! as with this on there is not enough power to operate the two actuators. I have done this and it is Working correctly at the moment...

Hi, we recently discovered that if the heating is on and the HW tries to come on the actuator won't open the HW valve. Similarly if the HW is already on and the heating gets triggered then the heating actuator doesn't work. They both work fine via override if neither is on So the valve units...

Thanks for the response, after consultation I am leaning towards a strip/trench type footing as we want some bare ground inside. Any comments from anyone on whether it's permissible to pour concrete to just below ground level with no frost cover? Cheers,

Hi, I am having a 1.8 x 2.4 m. wood frame greenhouse 2.2 m. tall with dwarf single skin brick wall about 0.7 m. high. Would a raft foundation be OK and would reinforcing mesh be essential? Any comments on minimum raft depth gratefully received. ... If I were to have a trench footing instead...

For info: Actually managed to find the model - NHT645SGB/01 FD8304 and the part appears to be 00609162 as on http://www.applegate.co.uk/b2b-products-services/9f5052508e8611e395ed005056822514.html Looks like it is secured to hob top by a nut underneath. Any ideas on possibility/degree of...

Hello, I have a Bosch gas hob with a small, spring-loaded 'main' push button switch which needs to be depressed before any of the burners will light. This hob was not bought by me and the id. numbers are impossible to read correctly without dismantling the kitchen unit - I am not that desperate...

Thanks for the useful replies, I am edging towards torch-on felt as it seems to have least number of serious negatives according to my research. One more option has cropped up though - bonded Alwitra Evalon-V single ply membrane. I can only find sales promotion material which of course is very...

I recently made some enquiries about replacing my felt flat-roof with GRP. One roofer told me that he could fit GRP but it shouldn't be done in January as it needs a few dry days to complete the job, he was also a quite sceptical about how good GRP was anyway and said that he had heard of 'lots...

Thanks guys, I'll get the fitter to advise me when we get the new doors installed~alternatively I could just stick them on top as I need to repair the shed roof and they are just the right size; plenty of light but possibly not very aesthetically pleasing! (only kidding!)

Cheers Andy, thought that might be the case. Boo hoo!

Hi, I am repairing a shed and also replacing my old double glazed (aluminium) patio doors. I was wondering if it is feasible to break up one of the old d.g. Units into separate sheets and cut one up to make shed windows. I am a novice glass-cutter and have only cut 'ordinary' glass in the past...