Search results

i need to get a new cast iron vent and fit to front of house. what's the best way to fit was thinking of using sticks like s*** any ideas

i noticed on a bright day i can see daylight throught the double doors o have is it a new seal i need or is it possible to Push the doors closer together at the bottom

ive noticed what appears to be a wet plaster smell from my shower. i checked the silicon around the internal perimeter and appears fine. i unscrewed the shower trap and wondered shouldn't there be a silicone bead around this area ? is it possible water is getting down the side and causing the...

My paving over my manhole cover has worked its way loose and so I chiseled out all the existing mortar just seeing if there is anything I should do other than fill with fresh mortar and stick paving back down see.pic I've bought a bag of 25kg ready mixed mortar do I need to do anything else

I've removed my skirting and I'll shortly lay a laminate floor which I imagine will sit slightly lower than the carpet/ underlay..I'm concerned I may have the line of the old skirting around the perimeter. What's the best way of filling /hiding

I had a bit of a bubble in my paintwork which I peeled off and then painted over the s trouble being the thickness of the paint coat at the patch is shown through what's the best way to smooth this see picture

My small bathroom is only 3.2m2 all suppliers seems to offer 15m2 rolls so I'll look on ebay for smaller quantity

Tidied original question hope this reads better

What type of underlay do you need for the vinyl planks is it the same as normal laminate flooring

Some of my laminate tiles have moved and opened up a gap is there an easy way to fix without taking off the skirting?

Sorry total novice. Will this need to be sand and cement mix?

I've had to lift my laminate click tiles due to shower leaking. On lifting the old laminate click tiles I noticed the installer had used 2. Layers of wood fibre underlay + 8mm laminate tiles which made a build upup of approx 18mm make up. As a replacement I quite fancy the vinyl click plank...

Loose paving on manhole cover I have a couple of loose slabs as pic over my manhole cover what should I be doing to remove the wobble. Between the slabs was geofix slate colour however this is £35 a tub and can't be stored once open. Seems such a waste to go buy another tub considering I only...

My light switch no longer works and I opened up to find the power on button was snapped. I therefore need a new switch. My neutral wire is continuous so I need to know what type of switch do I need see picture

I've recently bought some slate wall coping to fit to the top of my small wall. I don't want to use cement between the pieces but want I slate colour grout. Anyone recommend a particular product suitable

I have a fence now leaning over because of the strong winds recently. I don't reckon the post is snapped but need tips how to straighten it up again.

Managed to get my hands on a ryobi hedge Trimmer from the local auction. Though it has a two pin Connector What type of adapter do I need to get this powered up

i plan to put some decking in my back garden albeit it will only be approx 4inces off the ground level which is a bit uneven. what should i do for a base with it being so low ? will i still need posts in concrete? of can i just use broken slabs propped up ?

I used the zinnser guys but as for brush cleaning i threw it away Just used an old brush that i was going to toss anyway

Tbh i just fired in with the White haven't really had problems with other house surfaces should i just keep firing on more coates ?