Search results

Probably as above, the mains power off is fault but wouldn’t report on coms, however mains power off is a specific condition. I suspect it’s down to the reporting codes and how they work, these can be changed but wouldn’t recommend it

it maybe possible, would have to have a play. You can force omit attribute in the zone, then force the zone to remain open before and during the full set only and not the part part set. The problem is the zone has to be active at the time of setting for the force omit to come into play and...

There’s been a few issues with how you add the doorbell to record the video 247. You would think it be possible. Not 100% sure why it’s not possible, I would guess you might be able to cheat the system for the NVR to provide the power and plug into a non POE switch. For the network...

Which output are you using ? What device is it triggering? Was the mains off registered in the event log?

believe it’s intended behaviour and may even be officially documented.however no sound should be no sound. Something is telling me that it has been brought up before and completely slipped my mind. Then again it might have been certain versions of keypads and panels or after a certain version...

Your eye sight is better than mine

Can you post a picture of what it is you though was the battery, you give a very specific reference. It does use a battery but its unlikely to need replacing for a very very long time

well its clear as suspected it isn't power supplied being the issue. without hearing the tick its hard to say. You can make the keypads tick by changing the tones of the keys when pressed. If you press Yes and Menu together then press yes until you get to Keypress sounds, does it say click...

Hmm struggling at the minute with access to this forum, behind a vpn at the minute which appears to work, not sure whats going on. can access everything else just not this from my ip address. Can admin advise via registered email please. greeted with a single line error message to try later.

Hmm, the cylindrical battery you refer to is for the Mk1 wireless bell not a hard wired bell Mk2 uses2 square Mk3 uses 4 x cr123A batteries. The hard wired bells use Nickel metal hydride battery not lithium Pretty much wireless uses a lithium battery set, hardwired Nickel batteries main...

well if you had been free like so many other you would have probably let me know and I could of provided the number then, or like so many others they just look me up.. if your free later today let me know

cant see power being a being issue with one pir and one smoke, the network has 1 Amp to play with, 300mA for the keypads and the expander and at a push around 100mA for the two devices, but to be certain you can look up consumption in alarm

gove us a call after 10pm but before 10:30pm can go through a few things with you then, just writing some quotes up at the minute

POWER or INTERFERENCE as adding the 8XP is when things started I would measure voltage getting to the keypad and the expander. I would disconnect the expander power and T and R and see if that resolves the problem and measure the voltage at the two keypad this will give an idea if its power...

Check power, check interference. Without seeing hearing it can’t comment much more. i am aware of the keypads may do a clicking sound and usually applies to power or interference and isn’t permanent, but it does suggest something isn’t right.

There is a video with it on you tube but labelled as default codes.

the app would tell you if you can log into it. download the smartcom manual its available online will give you the process (google AI searches give the procedures these days). once you have the ip address changed you will need to generate an app code then create a Texecom cloud account and...

look at code default videos on you tube

No worries, its hard to follow as to fault and solution but it is there. The wiring was incorrect for the wiring type chosen, ie wired double pole but using normally closed.