Search results

Thanks for the reply, yes there seems to be a unit but no sensors connected just mains. No sound when reconnected to power either. I don’t have a fob, but how would it work with only mains to it ? I need to know what else is required to make it work or if I need to buy a whole new setup...

Thanks for the reply, I have added some images of it helps ? There seems to be some sort of box where someone has tried before but looks like a half done job

Hi All, We just moved in to a house that has a roller shutter for the garage. As it is now there is a wire with live neutral and earth coming from the roller shutter motor connected to 3 wago connectors then to a bidirectional weather proof rocker switch for up and down opening. The switch has...

Just to bring the thread to a close from my point of view, I did it like this. I used the sliding bevel to bisect the angle for the mitre.

Thanks, I’ve seen this product before in YouTube videos. I’ve just had a thought the Plaster at the bottom kicks it out so the skirting boards are not all flushed to the wall making use of this product a little bit tricky but not impossible. I consider my options.

No, that doesn’t sound like a bad idea. I wonder if it could be done in Plaster of Paris?

Kerfing it would look the neatest but would it work on such a small radius ? Plus it’s Victorian profile so pretty delicate up at the top of the profile - pic attached to show profile

Hi all, as the title says how do I get around this bullnose section of wall with 9 inch Victorian profile skirting boards? My first idea would be to mitre the long lengths from the other wall up to the bullnose then a mitre and a small piece diagonally over the bullnose to the next wall and then...

Nope, it’s outside the conservation area

That location is between so can be 2m

Between properties 2m Front 1m

I’ve just downloaded the title plan and no indication of ownership is present. Furthermore the land registry states that it does not record the exact boundary between 2 properties and there is usually no record of who owns the hedge, wall tree or fence between 2 properties. Wind load is another...

I’ll find out who has ownership of the wall from the deeds. Have a look around the area and there seems to be many houses that have wooden posts drilled and bolted or screwed into the walls and fences attached to the posts and some horizontals. It’s not practical to concrete posts into the...

Thanks for the reply. That’s a good point about ownership of the wall. I am not sure regarding height. Total height of the fence shouldn’t exceed. 2 m. Regarding ownership of the wall, if the fence is erected on my side of the wall, does it make any difference? Thank you

Thanks for the really helpful comment. We want to use the space to the front as it’s south facing - I don’t see a problem.

I’m not sure if in the garden is the right place for this post, so please advise if not. I’ve been having some problems with neighbours after moving into a new house. The house next door is a rental comprising of five flats and I’ve had problems with two of the residents already so I’d like to...

Don’t worry about it your help has been invaluable thank you very much. Sockets are a lot easier as there is no switched live so cracking on with three sockets.

All done. Chocolate block idea worked a treat. Thanks for the help. Now to add some sockets on a different circuit

Just an idea the middle light the existing one works correctly, inside the unit There is a connector that allows a total of six wires. I assume so you can loop another light unit off it. Could I not just connect a larger chocolate block connector inside the casing of the light connect and to the...

I ripped over to the house to get some pictures. The first is obviously the switch the switch wire goes up some conduit and comes out as a single wire. It’s a little bit difficult to see where it goes but it then becomes two wires and I must assume that the second wire is coming out of that...