Search results

Sounds normal.

I'm not sure those friction hinges are adjustable. Have you looked at the top hinge to see if it loose or broken. You may need to relace them if it is a case of the pivots wearing

When do jobs ever work out to plan. Perhaps the damp is actually condensation under the floor and caued by poor air circulation. The poster hasn't been very clear about what the actual problem is.

https://www.diy.com/departments/diy-upgrade-geberit-twico-i-dual-flush-valve-includes-buttons/5055639195370_BQ.prd

Slacken off the locating peg . Place plug in hole. Centre then tighten peg whilst it is in place.

Yes he should have chimney liner or trunking the length of the chimney and yes he can't encroach on your property to do it. Depending on the type of fan he is using it may not powerful enough to blow air up and out the chimney and that would contribute to damp.

Don't think regs allow a 30" external door doo they

Never seen a tap connector like that before, but if you are after one of these...

Get the edge of the next one straight to the other first. Then cut a piece to length turn it over and mark the cente point then join corners to the centre and cut to the line.

And give the isolator valves a squirt of WD 40 and leave overnight first.

Just wire your timer contacts in parralell with the controller and take 12v from the controller to supply the timer if it has a suitable outlet. Could really do with makes and model numbers of the various components.

I think it's presumed the chimney will have a trunking throughout its length ( by me anyway ) and an exterior cowl. Hob extractors would be more than powerful enough to blow through most chimneys.

Not trying to answer your questions but just thoughts that came to mind when reading your posts. Will the window supplier still honour a warranty if you don't let them do it as they want to. Aren't you supposed to get sign off paperwork from a regulatory body with those sorts of windows ( is it...

"I am completely unaware of the danger of page numbers." Death due to boredom.

Bit dangerous to handle live wires as shown n the video link. They were insulated spade connectors but obviously not as safety concious as we would be in the UK

It's not something I have ever used but I think you could vent up the chimney using one of these. https://www.extractorfanworld.co.uk/blogs/condensation-traps Never heard of a building reg that prohibits a vent pipe passing through a chimney void. That would be my prefered option but it might...

A pic of the outside would help, but I would tend to think this might bt your problem and the thing to do first. "Rainwater entering through the unsealed window perimeter."

Going for another 10 :LOL:

Always used a piece of 15mm copper pipe with a dog leg in for pointing