Search results

Update: the strike’s supply comes from a camera doorbell, which can be activated using a fob, mobile phone or the video monitor in the house. Supply to the doorbell comes from the video monitor, which gets its supply from a 24v DC transformer plugged into wall. Supply to the doorbell is 24v DC...

New lock: https://www.toolstation.com/era-bs-high-security-nightlatch/p91943?msclkid=fc554a948da31a7c6cab235a82ceb8a4&utm_source=bing&utm_medium=cpc&utm_campaign=_PMax_Ironmongery+%26+Security_Bing&utm_term=2324848619381248&utm_content=Security Tech spec for existing n203 strike says max 9.5mm...

Pic of existing strike

Ok, I’ve re-tested, this time removing cover so to get better connection with multimeter probes. When set to 200 on the AC side, I get a reading of 4.3v When set to 20 on the DC side, I get a read v of 2.4v. Now… I replaced the old audio intercom with a video unit & camera doorbell about 4...

I replaced the lock, which has a longer throw than the old strike can manage. Attaching a pic, but no, can’t see + or - on the strike. Yip, testing it when the release is pressed. However see update below.

The old one is a Dorcas N203 12v. Not selected new one yet.

Hi M looking to replace my door electric strike and I’m not sure if existing is ac or dc. It says 8-12v on it but when I google the model it’s available in both versions. My multi meter on ac side seems to only have a 600 or 200 setting, and it doesn’t read anything (other than a minus...

I replaced the seals on a leaking magnaclean about 3 mths ago, so possibly some debris in the system. As heating working fine for last 6 hrs, during which there’s been regular demand for HW, I think it’s less likely to be pump. Had to drain system a tiny bit this pm, removing what I added this...

Yes! It’s still the 831. I noticed pressure did jump up when it started working, as had to drain the system a little (an hour after adding pressure) to get it back into green zone. Altho, that doesn’t tell me if it’s the pump on last legs or sensor does it?

Hi Yesterday morning awoke to a cold house with Vaillant Ecotec Plus (fitted 2012) showing f75 code. After adding a little water to the system, switching on/off, it started working again. However, same happed this morning although took a few hours before it started working again. Having read...

Hi, Just for the record I bought a kit for c£110 on AliExpress. Arrived within days, and it’s been fitted for a week now. There were cheaper options but I needed to know the dimensions of the indoor monitor and v few adverts provided this information. Verdict? It’s pretty damn good! I needed...

No, looking to buy as a kit. The Tmezon link you sent looks almost perfect. However, not keen on the name plate on the camera unit - we’ve had a brass name plate on the door for years now! Found this as an option too: https://doorentrydirect.com/srs-7052wkit-01tuya-2wire-villa-kit. Pricier, and...

Having thought more about it, I’m leaning towards a system that provides: - Video to monitor (don’t particularly need it connected to a phone) - ability to release door using a phone (kids often forget keys, never ever their phones!) - I’d rather not have a key pad on the external device...

Hi I’m looking to upgrade a v old door entry phone in my house to a video one. It is a single dwelling set-up. From searching online, I don’t find too many brands but the ones I have all start around £250-350...

Great, have ordered now.

Hmm hadn’t thought of that. Maybe same way my phone rings without a clanger?!

Just now loud enough, and there’s a delay when routing thru Bluetooth mini speakers.

Hi For a group activity, held indoors for 20-30 people, I need a device that buzzes. It should buzz continuously for as long as an activation button is pressed using a finger. It shouldn’t vibrate, or play any alarm/siren tune - just a simple buzz sound, that in most cases will be activated for...

Hi, removed the loop and there is a v small leak even although the valiant CW valve beneath the boiler is set at closed. Do you know if this be repaired or will it have to replaced?

Hi I have a Vaillant Ecotec combi boiler. My magnetic filter is leaking and I’m waiting on a new seal to arrive in next few days. I’ve removed the filter and switched off valves at the filter pipework and beneath the boiler on the flow and return pipes. I’m hoping to continue using HW as...