Search results

What is that type of seal? Plus where could I mount them out of reach??

One of my other properties has them fitted above the doorway/entrance to bathroom and kitchen. Tenant keeps turning them off as she reckons it makes the rooms cold. Starting to get black mould in areas now and have never had problems before. Cheers

I don't think they will bother to remove a fuse tbh. The Envirovent fans are silent on when on constantly/trickle. They will only be aware of them when boost is activated. The reason is I have had this before with fan isolators being fitted and mould/no air flow in bathrooms and found fan...

Hi all Cracking on with rewire on one of my properties and done x2 rings and ripped out all the old wiring etc. Looking to fit x2 constant trickle fans. One in bathroom and one in kitchen. The kitchen one was fed from a switched fused spur (4" hole already there). The bathroom one...

It dues se a bit dodgy. I've decided on this now. 0.8mm thick and good reviews. https://ebay.us/m/LGmvUA What taps are you guys fitting from Screwfix/Toolstation or similar? something modern and simple (don't want pull out shower head etc) and that can be replaced if fault occurs. Plus what...

https://ebay.us/m/Tgg2oA

Probably going to get one of these. This is 1mm, but is reversible with extra hole- https://ebay.us/m/tHdeh6 This is 1.2mm but don't like idea of square strainer/replacement 'plug'?- https://ebay.us/m/tmoFEB

My Blanco one I fitted in 2000 has flexis. So do all the other monobloc's I have fitted since.

Mmm. Did not think about that regarding AICO alarms. Pretty stupid not to have some done go of induction when power is lost. Are the lithium batteries in the 3000 series 10 year though? Which is the lifespan of the alarm as well.

It will probably be a monobloc with integral flexi's.

So I should be looking for a 1mm or 1.2mm? Mine is rock solid I know that. Must be 1.2mm.

Looks like that is only 0.6mm thick like all the cheap thin ones?

It's one of my rentals mate. I'm gutting the place as it's not been done for years. Needs EiCR etc. plus in Wales it's also mandatory to have interlinked mains battery back up smoke alarms upstairs and downstairs. I always fit AICO.

Not sure if its fridge freezer will need its own curcuit tbh. The kitchen is the longest run as well as it's the opposite end of the CU in the extension. I will be leaving 900mm gap (think that's enough?) at end of units for tenant to supply their own. In all my years as a spark it's been...

Upstairs ring main. Downstairs ring main. Kitchen ring maim. Plus separate feed for boiler. Upstairs lighting Downstairs lighting. That makes it x6 RCBOs. I will also be fitting wired smokes uo and downstairs and probably a a combined heat/smoke in kitchen. All interlinked. Are you...

Hi all. Getting stuff ready for kitchen fit in a rental and seem some terrible stainless recently. They seem very thin/flexible and cheap imo. Is there anywhere who supplies a half decent solid sink for around £80? I have a Franke in my property and it seems rock solid compared to ones in...

Looks like ring up. Ring down and kitchen ring then. Lighting downstairs with feed to switch's as it has downlights. Upstairs I might do 3plate/feed to pendant. Thanks

Hi All Industrial Spark by trade and done my 18th years ago. Chasing walls etc and doing first fix. Looking at loads of posts/threads it seems ring mains are no longer a thing with reduced wattage items etc. Radials seem normal with a 20a RCBO. Upstairs/Downstairs/boiler/kitchen. Then...

100%. Exactly, it's devolved and English law does not apply.

Lamp type make no difference it's the fitting that is fire rated. EICR is required every 5 years as it's a rental on Wales. Plus interlinked smokes, one up, one down. CO can still be battery but I'll fit wired plus combined heat/CO in kitchen.