Search results

Thanks for the reply. I don't think it'll be scaled up, we're in a soft water area, The flow rate from cold tap near the branch pipe is just under 10 Ltrs/min at a pressure of 4 bar with a flowing pressure of 2.8 bar. Water company have tested this. I am on a common supply pipe with 5 other...

Does it not say in the instructions that came with the fan?? My educated guess would be that it is the fan's live feed. i.e. Blue = Neutral Brown = Live feed for light Orange = Live feed for fan Green/Yellow = Earth

PI know it's a combi and obviously the pressure/flow will be lower because of this. But as I said previously this is only affecting the bathroom not the kitchen.

I have just fitted a new bathroom with thermostatic shower and the hot water flow rate is awful. The system is cold from rising main (no header tank), hot water from Combi boiler. The hot pipe runs from combi boiler in 22mm, under the floor through the seperate toilet where a branch of...

Hi, Your switch sounds like it has the following configuration... L & N in should be permanent live and neutral feed from the lighting circuit. Load & N out should be neutral for the light and fan and the light live fan should be the fan live. Your existing config sounds like a...

Hi, I'm fitting a thermostatic mixer bar shower to my new bathroom but I've a few problems. I've chased out the brickwork to under bath level for the pipes, but in places when I was chasing the chase has gone about 45mm deep into the brickwork, I've read the maximum is 30mm. Is this going...