Search results

I wonder if you could confirm would be ok to use these? Hollow Soffit Board - 300mm x 10mm x 5mtr White At £12 a pop it would be a much cheaper option, ok still have to buy hardware, battens etc. https://www.pvccladding.com/hollow-soffit-board-300mm-x-10mm-x-5mtr-white-p-H300/

Thank You gents, i decided to go with upvc 100mm open V cladding which looks as though it will do the job although i had not considered it until Harry's post, it will be easier to work with and slightly cheaper than metal cladding although it will be a bundle of cash once all the corners...

Used to be a site hut and s/h when brought 30 years ago, painted in gloss white which is peeling on sun facing sides and also seeing quite a few rotten pieces of the tongue and groove wood which would be a pain to replace and am considering overboarding, what do you think would be best, ply but...

I used this...

Rigid so new washers, i don't trust the flexible things especially upstairs.

Thanks for the quick reply, was going to use the existing connectors so just new washers?

Will be fitting a deck mounted tap to the bath and wondered should i use a smidgeon of paste on the washer or a few turns of ptfe.

Thank You advice taken.

Sanded a white gloss radiator and then painted in Crown satin but the colour does not work so want to revert to Crown gloss white, have started to sand down but will i need to remove All the satin or just sand and prep for the gloss? TIA. Just to add the satin was oil based as will be the gloss...

Thanks for that sir, another project to the list.

Saw a pile of rubbish on a local garden and this was amongst it, do the group think it will be frost proof as would like a hanging Fuchsia in it although it will be a small pot, i intend to seal the top and bottom edges with silicone as the glaze is minimal.

Yes they are in the bridging unit and the hood will be attached underneath, used a switched spur fused at 3a as per manufacturer.

Thanks guys all done.

Thank you Mikey and good point Terry will drop it tomorrow and look.

Hi all, We will be fitting a 150w cooker hood shortly and the easiest cable run appears to be from the light in the kitchen as this would just entail feeding the 1.5 along between the joists after having removed the light fitting as opposed to pulling floorboards up and final connection via a...

John, Thanks for that will take a look and try and find a merchant that has 1 in stock, hopefully they will let me see if an offset will fit to suit location.

Anyone?

Would like to fit the above but the soil pipe comes out of a concrete floor and is 230mm from back wall, at present the pan has an offset fitted to slightly counteract the floor pipe being not central and this is 225 to wall and the pan outlet is shown as 205 on tech drawings, i don't have a...

Yes, still copper wire.

We are not with bt but Shell(soon to be Octopus) the router is fed from the master box in the hall which is a MK4 VDSL Plate & NTE5C via the phone socket next to the router the grey cat5 cable goes to the pc upstairs whilst the disconnected lead is for the garden workshop, the router is...