Cheers everyone, will remove electronic gear and use the wires connected to 3/4/5/6 and insulate 1 and 2, after reading around i am surprised that Energizer do not include a sticker to say that led tubes are fitted sp will dymo a couple up.
Afternoon folks,
Fitting has 2 t8 36w tubes that seem to pack up after about 9 months so got a couple of Energizer18w led's to fit, instructions that came with the tubes only show fitting instructions for a magnectic ballast and are hopeless, the tube after much...
Must say that is neat but will other manufacturers follow suit hoping that Bosch screw up through lack of sales, perhaps if they do i can get cheap 22mm discs cheap as they are offloaded but then again it won't happen overnight.
Been looking to get another grinder for light diy as my old B+D burnt the switch out and have been looking at a Bosch 115mm one at bq but it says the disc bore is 21m, whereas most seem to be 22/22.2 so would this tie me to buying Bosch discs rather than generic ones.
Now it's all state of the art gear, fully digitised and doesn't leave much to the imagination, That is true but try a listen on 3.615 which is used for old military sets going back past the 19 set and the lovely sound of AM.
Finding 200 sovs was a nice touch as all i have found monetary wise was fourpence hapenny in the garden,from what i recall it was the airbrushed pictures in Health and Efficency for us as kids.
I thought it strange that he moved a pipe given that the unions had a lot more power then, he didn't do much of a job on the joist either as the floor still has a slight rise in it.
Had to take out a window board to lower it and found the chippy had been tallying his hours on the back house was built 1960/65,what interesting or old stuff have you found whilst renovating.
Need to silicone around a new frame and was looking at dow corning c60 low modulus as it seems to tick all the boxes apart from anti fungus content, the old frame was plastered in and bits of plaster did come off over the years due i guess to being east facing and thermal movement, i have used...
With wood frames i didn't mind the beading but with plastic somehow it does not look right i guess it's my age and what you grow up with but with plastic without a trim i quite like the nice sharp line so guess it's all a matter of preference.