Search results

I doubt you'll get anywhere identifying it, you're talking about 40 years ago. Besides digital copies of lintel specs didn't really exist back then, certainly not for Joe Public it was all physical manuals so that data will have all been lost to time. The guys manning the tech helplines won't...

If going the Kingspan route I would fit the foil face facing inwards, then the breather membrane on the face of the insulation then your vertical battens.

He just wants to insulate his shed a bit woody he's not building a house.

The Megane was passing every year until 2016, when I got rid of it.

Is the acoustic roll you're proposing suitable or will it deform? Seems like an odd choice of insulation. In any case the breather membrane goes on the outside of the insulation behind the battens.

How would you use Rockwool without any timber studs? If you want to avoid studs then you'd have to go the rigid insulation route, you still need a breather membrane and for the cost it would be daft not to, vertical battens & horizontal cladding presumably?

Yes but given their unconventional runs unlike the perfect vertical pipes you always see these things fixed to you'll have to get a little inventive/maybe get the angle grinder out if you want to get 100% protection eg...

It passed every year, that said it was around a decade ago now, I don't know if the rules have changed. AFAIK only red warning lights or lights that could indicate a problem with the emissions or safety will fail. But I would give your MOT station a ring and ask if it's an automatic fail or not.

The blisters, whilst unsightly are probably fine providing the membrane is intact. Probably a result of moisture left in the roof beforehand or poor adhesion.

https://www.sealantsandtoolsdirect.co.uk/saw-cuts-and-movement-joint-sealants/sika-everbuild-hybriflex-smp-hm-expansion-joint-sealant-grey-834156-fphybsmpgy

At the end of the day, the speakers (unless the speakers were Bluetooth and battery powered (which would be madness for SS)) need a cable.

The glow plug was permanently illuminated on my Megane back in the day, Renault said it was a faulty wiring loom so I lived with it permanently.

Come on foxhole, please try to communicate how one can avoid having to hide a power supply cable of a speaker that requires a power supply cable in order to power it's Bluetooth receiver.

So as you don't understand the issue why not just stay out of the thread next time eh?

That's right, so answer the question.

Prey tell how does a speaker emit sound without a cable?

Got some decent photos?

Do surround sound speakers connected via bluetooth not need power then?

You would still need to provide a power cable to each speaker. TBH I don't really understand the whole cable at the corner issue, can't the cables just run under the carpet?

It needs replacing not fixing.