Search results

no worries, without them seeing your problem not sure how they can comment. As I know I would need to see the problem to say oh yes that’s not normal or yes it is normal. However videos can be subjective due to frame rates and resolution, however you should see a significant dim on the same...

We don’t give ours out sorry, there’s a few places online that have them, some verify your an engineer and others don’t. Security installer forum is back up and running I believe lots of folk on there with manuals both on forum resources and companies, they used to verify you as an installer...

Someone even used to sell them on eBay, no idea if they still do.

Have you searched online, they are readily available on various sites?

Ali please do not call me again. Email the video when you have it. I am struggling to believe your unhappy with a products performance and your still using it, rather than sending it back. When you called the second time you told me things which you are now contradicting. Email me the...

Never got the video of the bells from you, do you have these or not? Just the second time you phoned me you asked for me to test our bell stock to see if we could replicate which is cheeky at best but if your having a problem and I use these bells I have a vested interest to make sure there is...

you have the answers, on the orisec panel similar outputs exist. The CP20 has 5 panel outputs as standard. so wire it to one of them. output 4 is programmed alarm at default and the attribute can be inverted, its the second option

To get the back light on or off at night you have to wire it to a photo cell so it comes on when it gets dark positioning may be an issue. Otherwise it’s programming on at x and off at y problem with that is it’s summer day light is different winter day light hours. You can use holiday times...

It requires lateral thinking they have shown the wiring and programming for there panel which is all you can expect them to do I didn’t see how the alarm output is what you were asking for earlier. End of the day the principal is the same. You supply 12V red lead ground/0V black lead and back...

Mainly because the plastic on those is very thick for the lens. Can’t remember the default colour on oddy X

battery switched of battery is 0? as it feeds the bellbox when mains power is off. I cant comment if the batteries will be good still, but they could be okay, easiest option is not use the zones, until you can get up to the batteries and switch them on and see how they behave.

confirm devices relates to keypads and expanders. confirm devices will show an X for a lost device until its reset or the problem with the device thats lost being fixed.

The fault relay amongst many things monitors the battery if I recall correctly, not sure about the tamper without checking the manual, with the battery off it be in fault. you can turn off the zone monitoring the fault relay etc for now until you get chance to get up to the bells. As for over...

WRT to the phone discussion and a look at the LEDs when one LED or or alternating properly. I could only find one youtube video showing the closed lid and it being tampered and untampered to show the leds as single and both flashing. I think the reason why you think the LED is brighter is...

If you have a cheap meter you can do a continuity test on the fuse, to check if it’s good before you put it in and blown afterwards

Think it’s time you called an alarm engineer. Fuses are designed to function for the loads being applied. You should replace fuses like for like, but fuses will blow repeatedly if the issue causing them to blow isn’t resolved before fuse is replaced.

https://texecom.websitetoolbox.com/post/odyssey-x-backlight-flash-8493344?highlight=strobe%20backlight&pid=1295546763 may help you understand how on a Texecom panel

The back light can be wired to the strobe output of the panel and or an output and use chains wrt to the orisec panels and custom outputs on Texecom panels and similar applies to most of the other more sophisticated panels.

if you were using the Odyssey 3 , and not the X you would Struggle to see the leds at all during the day. when the odyX was released the blue lens was so much easier to see the LEDS. Have to say on the Orisec LEDS I haven't struggle to see them during the day on the ES120/130 or indeed the...

what colour lens? the back light on the odyssey X is wired to 12V and 0V at default, you literally wire one leg to an output and have a custom out output. Need to know what panel its going on. for example all orisec and Texecom elite panels you can program an output up, on other panels like...