Search results

Nope they’re all open returned to what they were pre the clean , have fully opened them on the cold radiator but still Luke warm .the flow and return pipes going into the radiator are nice and hot though ...

Main 28 he Before you could hear the water running fast through the radiator . Same with my underfloor heating the system would get better flow as Indicated on the flow meters , hard to explain but I know it’s running slower for want of a better decritpion .

Hi all had to drain and refill a pressurised system after using x400 .since refil it seems I don’t get as much flow to the radiator and one just won’t get hot at all .. have bled it and have also done so by taking out the entire bleed valve , turning each side of the rad off and bleeding both...

I think there’s a small bit left in there I’ve got an adaptor coming later so I can get (hopefully ) and air lock out of a radiator with a hose later ...

Proba yeah hopefully won’t need to flush etc again and the mana clean will pick it all up Tks

Cool Thank you .. what do you think the ball bearing rattling about noise could be ? Saying that I just went to the boiler and that is materially died down now , just the old little gritty type noise and the radiator the same ?!

Ok thanks ..well the boiler and one radiator sound like there’s stones rattling around in them for want of a better description.. what might this be ? Thanks for your help

Ok thank you . It’s a main 28 he My issue is I drained down the system after using x400 and thst did the trick .. after I refilled the system with fresh water inhibitor etc I’m sure the central heating on some rads take longer now to heat up. Before I could hear the water running through a towel...

Hi all I’m sure This has been done to death but is it safe to remove the external metal case of my boiler , a Main he not sure the exact model . Someone has suggest the pump may be air locked so all I want to do is the bleed key ... Many thanks

Cool thanks

That’s what I assumed . Come to think of it I topped up with x100 last year after draining the undefloor heating with no ill affect . Have you used x400 ok In a system with mystery chemicals ?

Hi all . Had magnaclean installed and guy topped up with adey inhibitor . This will have mixed with the x100 that was in the system prior as it wasn’t all drained . Have read mixed things about this . Also I have some x400 I want to run through the systems and then flush etc . Has anyone mixed...

Yeah that’s what I thought and obv want to avoid ! May I ask your view on where to install the magna clean ? I know it goes on the return to boiler but instructions say before the filling loop . Some have said it doesn’t matter ? Cheers

Please someone help a newbie . I’m fitting a magnaclean and the Pipes are too close to the walk to use a pipe slice . Obv I can cut it with a hacksaw etc but will the copper filings cause issues running round the system ? Or what’s the easiest way to flush them out ? I guess I could chip the...

Thanks so I’ll put it just before the boiler as planned . Another question if I may , the pipe is too close to the wall to use a pipe slice .. obv I can cut it with a hacksaw etc but have read different views on the copper filings getting into the pipe causing issues.hows best to clean them out...

Hi all as above I’ve purchasd a magnaclean pro2 and looking for some help re where to locate it . I thought it could go just below the boiler on the return but the instructions say always ensure the filling loop is fitted after the filter . Without some radical changing of the current...

Thanks all hopefully will put out easily .. when replacing the pipes do you need to apply any twisting motion etc ? Thanks s lot

Hi all as above I have some pipe fittings that look like they are push fit . I need to fit a new tap how do i remove the existing pipes and can the fittings be re used ? Thanks

Yeah thats waht i intend to do when I can get the day off

Nothing works that's the point