Search results

:) Baby

Hi F, I understand what you suggest, but this is soil, they won't happily roll. Larger diameter = higher the shed has to be. C

Hi M, You need a damp course anywhere there is damp, that you don't want to get into the wall. C.

Stand

Hi F, I think the terrain is a bit too rough for the broom handle method. C

Hi M, Or a van :) C

Hi S, I just had a thought (in the bath) If the tow rope does over something to try to lift the front of the shed to stop it digging in. First I'm going to simply try dragging it, and see what snags, then have another think. C

Ok, C

Hi F, Yes, it would need to be a tractor/forklift type of thing, but I'll try towing it first. C

Hi, The thermal paste could be dried out? C

Hi N, Yes, I'll do something like this. Thanks all, I'll let you now how I get on. It will be quite a while though. Cheers, C.

Hi B and F, No friends, I'm afraid! C

Hi N, I'm a bit older than I was when I moved lathes etc, so a bit limited. It's going over roughish ground, and I see what you mean about snagging, the floor bearers are linear so that's good, so they wouldn't stay on the 'rails' Perhaps as they are linear, I could think of the undershed being...

Hi, I have to move a 10X8 ft solid built shed approx 30ft down a garden. I intend to lay scaffold planks as tracks and drag it. Any idea how much force is needed. Would a large van pull it, without burning out the clutch, or do I need a pulley system? Cheers, C

Hi P, I was being careful, and saw the Blue with brown jacket now switch with both switches. Then I switched the mains off again to connect the blue/brown into the fitting, casually testing it with my screwdriver light, and it came on. My kitchen is in 2x halves, and uses 2x different mains...

Hi P, Thanks for your fast reply :) That makes sense, cheers. C

Hi, I've redecorated my kitchen, and changed the light fitting from Fluorescent to led. The new fitting connection box has 3x connections Live Neutral and GND. It's been a long time in between, and I'm not 100% sure how to connect. The fitting is controlled by a 2x way switch, and when testing...

Hi A, Ok, thanks, most helpful. I presume the law changed for safety, so I'll put a sign up NO SHAVING IN THE BATH that should cover it ;) I looked through my 'it may come in handy box' and found a tube for the light, cracked open the super glued shield, changed the bulb, now to get the new...

Hi A, Possibly Saxby, but I don't see it online anymore. Installed about 2000 I presume the law has changed, so no toothbrush charging, where do people charge theirs. C

Hi A, My existing one does. C