Search results

Thanks.. will look into the cost of a repair via Miele. If it is more cost effective to just get a new machine. I don't have or want to spend the big bucks to buy another miele despite the many long years of service this one has given. I used to also go with Bosch machines previously but it...

The machine seems to be working as normal as it should be when spinning just after the spinning is finished the pump keeps going despite the cycle has finished

forgot to mention that it works fine when spinning.. in spin mode, just pump starts when it has finished spinning and keeps going/pumping

Thank you... I will try disconnecting the pump as you suggested. Is this PCB - EPW 900 - which I would possibly need to change? it looks complete, no requiring any soldering or such.. just putting in some plugs/connectors Thank you

yes i have, the drain pump is constantly running. I did hear click before the pump started running near the bottom of the machine when I reset/tried resetting the machine (removing the power for 10 mins and then powering it back in)

How easy it is check the control board or is it just a case of getting another control board and try changing it to see if works with another control board? Is the control board easy to change/replace or should i just cut my losses now and get myself a new machine? If so, what brands are good...

how to i look into this, is it an easy thing to check, fix or replace.. or is it time to look at buying a new machine now? Thank you

The bottom of the machine looks and feels dry. I did tip is back and nothing came out - tipped it back at about 30 or so degrees The only time the drain pump is not on/running is if I put it on a drain cycle, then the machine works as it should, it drains and finishes without any errors and no...

Tip in either direction? Is the anti-flood switch at the front or back of the machine usually? Thank you

I googled miele wt945 water drain valve - only comes up with the triple inlet valve.. and the other part i found is the pump. Which given that it is pumping water out fine surely isn't faulty??

where is that located on the washing machine please?

Hi all, I am having issues with my Miele wt945. There is no water going into the drum. I can hear and see water going into the detergent dispenser drawer and can also hear the water being constantly being drained/pumped out. I have cleaned out the filters (fluff filters, water filters)and even...

That worked thanks. Hopefully it keeps working. I brought some compatiable carbon brushes which stated that they work with my model it was the ones with the quickest delivery. If the brushes pop out again, I will try ordering and fitting some original bosch brushes. Thanks for your help all :)

One of the carbon brushes popped out.. I pushed it back in/re-seated it and it still is giving the E21 error code. Can anyone verify please what the exact way to reset the machine is/to clear the current fault. I got the following off the web Try erasing the stored codes first, in case it's a...

darn it, i spoke too early i tested in on a rinse cycle and it worked - no errors. When it was put on a proper wash cycle today, I am told it gave the same E21 error again grrrrrr. Will it be the motor or bad carbon brushes??

Update - changing the carbon brushes worked, I managed to change the brushes without having to remove the motor woohoo. It was fairly easy but fiddly - trying to get and squeeze/push the springs in took a while.

Thanks, I will try ordering some new carbon brushes and fitting them to see if that resolves the issue.

Hi all, I have a Bosch wab24161gb/05 washing machine. It is giving a E21 error code. There is not mentioned in any of the documentation/manual of the machine, but from the few posts on the forum, is this due to the carbon brushes on the machine needing replacement or something more serious...

Thanks will looking into it, next time I go around. I remember I had a issue my toilet flushing a while ago and I tried removing and cleaning that valve which resolved the issue but that was not a ball cock type one so will need to workout the easiest way to locate the location and how to remove...

it is an old style one - ball cock type similiar to this one (copied from someone else's post)