Search results

Thank you. I don't have a towel rail type radiator, I only have the standard rectangular panel radiators. Do I need to only isolate one radiator, drain it via the bleed valve and fill it with the Chemical cleaner? Also topping up the system pressure is done on the boiler in the usually way...

I put a new PRV on. But there still seems slight leak of pressure dropped about 0.2 bar over 3 to 4 days. No visible leaks on the boiler. Not done the balloon trick on the external relief pipe yet. Is there anything else I need to check? The heating and hot water seems to be working fine.

Thanks, I tried the inplace cleaning but still losing pressure slowly. I have ordered a new PRV, will see if that makes any difference thanks.

the pressure is not rising into the red, but the radiators are not getting hot now. The heat flow pipe coming from the boiler is hot though as is the pump. The radiators have been bleed and valve on radiators also are open The hotwater function works perfectly fine

It did not that twice, but not this time around and i have switched the heating on and off twice.

i have just recharged the boiler to 1 bar and put the heating on.. it is dripping a drop every 2 secs or so currently on the outside pressure relief pipe

I put the heating on and it is letting out water on the outside pressure relief pipe, it is more than a drip and the pressure dropped to zero when it completely drained. What does the mean please? Thanks for your help guys

Any ideas anyone please?

No i used the drain off point, which drained the boiler of water and pressure

I changed both the diaphragms on the DHW & central heating differential valve but i did not change anything. The central heating still comes on when the hot water is on, i.e. the central heating differential valve opens when i turn on the hot water. I was not able to unscrew/take off the two...

Thanks again for your help guys it is working all fine now but i have noticed that since changing the whole pump, the pressure on the boiler slowly drops... I have to top up the pressure once every week or 2 weeks? The vent on pump is fully closed and 2 screws attaching the pump are fully...

There is no Diverter actuator for my model.. i could not find it on my boiler... see attached. My boiler is combi 80e and not a combi instant 80e

Hi all, I have a baxi combi 80E boiler and 6 radiators in my flat. My boiler is leaking again and i need to use a DHW Diaphragm repair kit to stop it leaking again (which I have done previously). The water that is dripping out whenever I put hot water/heating on, is putting out some little bits...

Thanks guys :)

What is the best adhesive to attach wood strips to a brick wall please? I would like to avoid using nails or screws if possible. It is to attach a thin wood strip to along door frame against a brick wall. Thanks in advance

I will still have to put /apply the concrete mix between the door frame, so any ideas how long i would need to let it dry before i can fit the new door frame please?

Hi.. I need to replace one side of a external door frame. The problem is between the wooden frame and concrete breeze blocks there was either concrete or mortar.. which had crumbled from about mid height approx to the bottom of the door frame, it was a 1 to 2 cm thick. I need to replace this...

There seems to be a 20 or so second delay before the flame ignites. Thanks for your help again :)

Thanks.. it is kicked it after after 2 mins Now it's stopped working again.. only lights when i put heating on and not hot water only

I unscrewed it is and some air/gas came out