Search results

my mum would put the eggs and bacon in the frying pan to cook then go out and do some gardening for 10 mins or so it wasnt untill i was perhaps 12 that i realized that the buttered bread was to dip in the egg rather making a sandwich to hold the bacon chippings and rubber egg together :giggle:

yes really good job well done its surprisingly difficult to get the face and back surfaces 100%fitting as you are trying to get the 43 degree to exactly match the string that may or may not be a tad out one little point and i dont blame for not doing it as its a hell off a faff is a 6mm...

it can never be there as water is completely non reactive in a high energy way you need to separate the component parts as in h20 as in remove the oxygen as a useless part as its readily available in the air about and stops the hydrogen reacting as a fuel source

a response off putting water in the fuel tank is confusing as the car cant convert to a fuel as i said the post before you need perhaps 40% more energy input to convert to a fuel and as water is not a fuel you need the conversion to happen where an energy source and a plant can convert it to a...

i am trying to be kind as i dont do childish derogatory unhelpful or misleading i try to the best off my ability to be accurate helpful with out unessisary content that can be taken negatively when its only ever meant to be helpful-------and yes i do often waffle on --a lot as i try to be...

are you genuinely misunderstanding the situation or possibly just being deliberately mischievous to get your post count up ;)

by that argument beer and whisky should be free but off course the raw ingredients although cheap do not make the end product ;) hydrogen requires somthing like 40% more energy to produce the same energy output as batteries in otherwords 100kw to charge a battery will take 140 kw input iff...

its worth mentioning without reinstating the six sockets back to normal use [if safe to do]and the problem reoccurring all you can gather is the noise stopped but coincidently or because off who knows he may have lent on/pushed/disconnect /better connected in the process accidentally so you...

indeed now word manipulation has to be looked for they cant say things like german engineering that very old buzzword as they are not made or engineered in germany so will say things like "german engineer" as in designed by an engineer

my ryobi ' dewalt and bosch powertools and batteries are made in prc'china'singapore''malaysaia'mexico'japan'and include many other sources all genuine but often hidden away from where people think things are made for example dewalt 18v router sperrymore and germany is very prominent with the...

there are zero problems with Chinese made stuff if they are made from the same materials with the same quality control standard applied in other words it make zero difference where something is made if to the same standard

when you have achieved the rectangle accurately you then extend the slot cutting down towards the bottom but at a slightly steeper angle facing that face as in with the newel vertical and upside down cut down to the what will be the lowest longest length then reduce the angle to what the string...

you might think initially that its underpowered and iff it works ok it must be safe .... that is only part off the story and the highly dangerous bit is the charging circuit may turn it into a bomb as the charging rate will be around two to 3 times the level it can safely handle and the...

i read your post from a couple of months ago about Callahan and reluctance to use electric for heating and trying to connect to the reluctance off some now and then and the difference is quite big ;) then an industrial relations issue and no cop leverage or alternative ways to supply...

with timber sitting on the nosing and timber on the wall you have an "L" supporting 2 surfaces so no real guidance needed that assumes your saw has a rubbing face on the blade guard

if the string was 45mm thick you should have gone around 43 to 44mm deep to protect the saw blade or 45 to 46mm if a sacrificial blade how deep did you go?? it may just be easier to temporary affix timber for the track saw to run on against the wall in my case my dewalt plunge saw cuts around...

general thoughts increasing size wont increase the pressure as that's dictated by volume and elevation[weight] it will help the flow rate but iff its just a gravity fed hose in the present lack off rain 15mm would be more frugal

general comments you need to dig out the concrete underneath what ever happens so not as simple as cut at an angle and plant angled tiles on front so my thoughts remove around 40mm from under the tile front edge then cement in tiles underneath at around tile thickness back but fully just my...

think outside the box here drill a hole with the hinge hole cutter in say 6mm ply or mdf place the board in the exact position on the door you need the hole and firmly fix slowly cut until the cutter is about 4mm through the board remove the board and cut till surface flush if thats how hinge...

cracking job well done(y):giggle: