Search results

Hi, I am not a builder just curious. I often saw that the foundations of a house have a DPC membrane that is put above the foundation courses and the above ground structure. My questions is ... don't the bricks above slip off the DPC? Are the bricks above tied to the bricks below or is it safe...

Yeah so in this video a guy easily removes a traditional felt roof with a spade .. .gaining access to the screw heads and you can do what you like with no damage to the timbers right. What the hell will you do with a GRP roof? I think you are screwed. Perhaps that's why the builders used...

Don't care about them ... just interested in general if somebody knows how to remove such a roof. Unless you are the 1 in a million person who has taken care to mark on the surface the location of the screwheads and covered them so they have no resin on them ... probably 1 person in the history...

My neighbours replaced their normal asphalt roof with Fibreglass sounded very fancy until I saw two builders screw down some chipboard panels and with a roller roll on the resin etc... in a few hours ... then I realised how unskilled and moronic these new materials are. I would criticize them...

Just put some Thermawrap around the boiler condensing pipe ... what kind of paint should I put on it? Don't want the birds to peck on it? Weathershield masonry or something else? Cheers

Can anyone recommend a company for spring roller blinds made to measure? Cheers

Cheers I think you are right, I can put them in the front part of the top sash .... will have a look at the cellular blinds as well. Thanks

I need to make a roller blind 100cm wide, with 150cm drop but very very thin, because it's behind the old fashioned curtain. What's my best option? Should I go and find a tube of stainless steel from a merchant and fix on some ends ? Any ideas? I have about 3cm ish for the entire thickness...

Hi every time I switch energy suppliers they don't have my flat listed on the database and they end up taking over my neighbours meters ... and it's a goddam hassle to get them to sort it every time. The house number usually appears on their databases without my flat number ... so it's a...

Thanks guys actually no commas in that part of the text ... anyway the floor void is mine, so I'll get them to run a pipe out under it which I'm sure they will love at the top of the master bedroom wall, but needs must. Cheers

Perhaps you can decode this for me from the lease: "The property [my flat] described in the first schedule hereto includes for the purposes of obligation as well as grant the ceilings floors and joists and beams on which the floors are laid, but not the joists and beams to which the ceilings...

Can I ask, is the dividing line between the properties going to be ... the ceiling, in other words the underfloor void is part of the upper property? Cheers

Thanks .. their bathroom is on the rear of a the bedroom so if they do not use the void space which I suppose is technically in my flat, then the extractor duct would have to go along their ceiling wouldn't it or down to the floor and out the front wall cut into the wall?? Is that what is...

Hi, thanks for that. It's a Victorian house with a ground floor flat and I own the maisonette above. They have a ground floor bath/loo and the extractor simply vents into the void. How is the venting normally done in this situation? Would they normally have a pipe running on their ceiling ...

Hi, just discovered that my neighbour 's (below) bathroom extractor fan is venting directly into the space between his ceiling and my floor, on the edge of the room under the carpets in the corner is dampness. So I need to run a pipe right through my living room and I don't want it to vibrate...

I got some polyester resin and 1.6mm garden wire. Gouged out a hole top and bottom (making a cavity larger on the inside). Used the wire to make a C shape and folded over the tips of the C a bit to make a 3D shape. Squirted in the resin, the wedged the wire in, then resin the plastic bits...

@foxhole thanks that's great, i think on my AEG the plastic bit is too narrow,thin, and hollow to wire back but I will bolt the tray through and get a glue gun

Hi ... the bottle tray came off with the door fixing yesterday. It's quite old so no new doors available. What can be done to fix it? Glueing the fixing back won't work. Can I drill through the door and bolt the rack on? Is there something in the door like liquid or gas ? It's integrated so...

I wanted to document this; I have an AEG Competence oven, the cooling fan stopped working so I bought one on ebay. It is hard to decided which parts on ebay are "Genuine" as many are described as "genuine" or "genuine replacement" or "compatible part" ... so I thought okay I'll buy the cheapest...

Thanks I assume that means it is vinyl boards or tiles that you can sort of squeeze a bit ? Do you think it makes any difference if some acoustic underlay is added or won't that make a diff?