Search results

We have a large garden that had been left to go rather wild, lots of holly, laurel & yew as well as nice trees that needed work. A friend suggested that an Alligator saw might be useful and I bought one. That was well over a decade ago, back then the batteries were not Li-ion, so they did not...

Probably an IBC https://en.wikipedia.org/wiki/Intermediate_bulk_container The hole (middle of the top) is c. 8" in diameter, so fine for getting the contents in/out, but no where nearly enough space to reach in and secure the inside of a fitting. A neighbour has some at the bottom of his...

I have never done it but I don't think much patience or practise is needed. The cheap ones are often a zinc-alloy and, as @Mottie, says, they are very susceptible to coming apart after being hit. That is far more important. The better ones are relatively thick steel.

Nothing will be totally secure. but this https://www.burtonsafes.co.uk/products/keyguard-digital-xl/ I think will be better than most.

"I did what you suggested. Got long blades for saber saw. Of 5, 4 are toast" Blades are basically disposable, but 4 out of 5 gone is surprising. "Acer is evil in that between the wood was soil and stones that cutting tools suffered from" I did not know that, I've never had to remove one. I have...

Probably a bit late now, but don't cut it off too low. I would leave the trunk at least waist height. That way, when you have dug around the stump you can use the trunk as leverage to rock it side to side. This is the voice of bitter experience. Years ago I removed two conifers and cut them to...

Wood can hold a lot of water. I bought a batch of boards and even though I picked the least wet ones, they were still wet. I spread them out somewhere dry but shaded to dry and they went from 20kg to 10.5kg, however that took 55 days. After a while (15 days maybe) they felt pretty dry on the...

@opps Thanks for the suggestion. I think it is too far off the wall for that to have worked, but I can't be sure as it is fixed now. Once I had gained confidence in drilling tiles I was able to fix a (white gloss painted) board of the right depth to the wall.

@StephenStephen And I am quite impressed at the level of rudeness displayed by some of the commentators. Of course I am not talking about @Wayners and @^woody^ who offered helpful advice which I clearly said (post #6) I had followed. "the OP towards a number of people who have offered sound...

Agreed, there does not seen to be anything special about the PWB 600. I replaced one of the top pieces on my 'workmate' with a pieces of plywood cut to size. I drilled holes to match those in the previous one and then varnished the new piece.

I do as I looked up what a munsen ring is. As I said a support of this sort would have cost more, not matched the pipe of or the existing bracket, and probably not have worked unless it matched the pipe diameter by chance. So a white spacer matching the white walls is good but a white board...

One of the more ridiculous suggestions I have seen. The brackets came with the water pipe and match it. Why on earth would I, or anyone, want to throw away a functional matching fitting, then buy and fit a non-matching one that (most likely) will not work. At last you have explained what you...

I have no idea what you mean, because you have not made any attempt to explain it in your multiple posts. Spacers behind just the screw holes in the bracket would enable long screws to reach the wall and be hidden. Thus the pipe could not move forward but it could move backwards. A spacer...

@foxhole, did you read what I wrote? The bracket is not attached to the pipe, so spacers would obviously be useless. The bracket stops the pipe from moving forwards and the block of plastic (pressing against the wall) stops the pipe from moving backwards. Spacers would hold the bracket in...

Thanks. I did that and it was a very useful first step. The tiles on the wall are 1930s originals and I suspect that they were fired a lot more. On the modern ones, once I had got through the glaze the rest was very easy to drill, whereas the originals were as tough as modern glaze all the way...

If you get a tap make sure that it two parts to the outlet, one for the liquid to get out and one to let air in. I think that the one linked https://www.amazon.co.uk/dp/B01FDXINDY is like that. When decanting from a 20 litre creocote container I have used one (that I happened to have around)...

What we have done with some plants is to bury a plant pot close to it. Filling that with water means that the enters the soil some inches down (depending on the shape & size of the pot) and the relatively narrow hole in the bottom of the pot minimises evaporation.

Many years ago (a decade possibly) in the Telegraph there was an environment type column and the author had a bog-standard EPC done. The 'inspector' came round, took some readings, plugged the values into a program on their laptop (said program having loads of assumptions), and it came up with...

Correct. Patio Magic (Wet & Forget, etc) uses benzalkonium chloride as the active ingredient. This kills algae & moss but does not affect most plants.

Wet & Forget (and other similar products such as Patio Magic) contain benzalkonium chloride (BAC). They have c. 7% BAC and you dilute it down to c. 2%. However you can buy buy BAC at 50% which is much more economical.