Search results

What year is van? I think turbo runs hot and mineral oil won't take heat

You should use synthetic oil. Mineral oil shouldn't be used. You haven't bought the correct oil unless it's an old van. Check spec and year

Waterbased paint it's good practice to just dilute what you are going to use that day. When paint comes out the can you never pour unused paint back in because of contamination. To dilute small quantities use kitchen scales to work out the percentage of water needed. Bathroom scales for larger...

I've never heard music played in spoons or on bus. Been in news. Can't say I've ever been bothered with audible phone calls. Maybe it's a big city thing?

Multimeter is cheap from Halfords or Screwfix. Power off. Continuity test wires. Watch YouTube for information but it's simple enough and you will find switch wire

Have you looked online for replacements? See if you can get exact replacement. If not there are universal kits.

Got a picture of light fitting. Your diagram isn't correct. Well it don't make sense as I'm sure you are aware.

Ask the guy that done your bathroom. Will be more than happy to do it Im sure. Be nice and grateful even if its a bottle of cheap plonk or flowers for Mrs.

Buy 5lt of paint stripper as the larger tins aren't for DIY market and the good stuff, or if you can spring for a speedheater cobra infrared paint stripper, that will work. Definitely will have lead in paint

Be cheeky. Message a local tiler and ask if they would cut it for you.

Have a look at the different aerators online. Some screw inside so no visible thread line. Maybe that's what your have

Stuff like this https://ebay.io/m/yiiqfo

Forgive. You don't fancy something else? Wood effect ceramic tiles or wood effect cladding. Could just use uPVC planks that interlock. Something you could easily wash down and mop over. Mate used moisturizer resistant laminate flooring on a porch ceiling. Looked good. What about some lighting...

White vinegar. Wipe over will remove smell. I wonder if it's leaking a bit under flooring as not in nice. It's going to have to come out to look

McAlpine solid waste would be better than the flexi

Op. Have you tried wiring lights to a socket in the house so it's off another circuit?

One for the electricians. Mate had tripping box on final day of rewire when outside lights were fitted. Disconnected lights and all good. Reconnected and all good for a bit then tripped. Wired outside lights to neighbours outside socket and all good. Wired back in fusebox and tripped it...

Use products like tar solve first. Use a stiff paint brush and small wire brush. Get what you can off but don't damage bricks. You have 2 options. I think I would try this first. Get some matching bricks. Drill loads of hole to make dust. Buy waterproof PVA from DIY and thin 50/50. Must be...

Ok. I get it now. Remove all the plasterboard so that only one piece is fitted. Marked red. You will only have one joint to worry about. Put timber in just under so top edge is screwed through both the old board and new board. Screw joints will stop movement. You don't need those surface...

Id just use a polymer grab and 6mm MDF stuck to wall. Emulsion. Fit radiator to that. You can use corefix maybe