Search results

Thanks all I have the switches above with sockets below and plugs on all the appliances. Reason for asking is my glass hob shattered and getting ready to fit a new one and thought to ask before I strip everything out to replace.

Hi atm I have the above switches around the kitchen for all my appliances. Now do you still fit these above worktops or just have a socket fitted below in cupboards ? Thanks

Thanks I just assumed that you all had moved on when the screwfix/Toolstation type stores weren’t stocking it

Well I wasn’t paying for a new bottle so shed emptied and old bottle found, thanks all for the help. can I ask before I leave what are you all using nowadays as the 2000 are few and far between

Luckily in Morrisons shopping and they had one for £4 (I know) but will do for the moment

Hi I have a pile of the old dewalt 18v cordless tools and my last battery died, so if I buy the 18v to 20v adapter and a new 20v battery can I plug the battery & adapter into my old 18v charger to charge or any help on what you did to get a new battery for these ? Thanks

So what are the plumbers/ heating boys using instead of Primus?

Thanks that’s for the refill but had a search and they do the bare bottle, but at nearly £50 inc. as they were my local since yhs days I wonder if I still know anyone for trade

Hi so it’s been years since I last used mine and now can’t find it although I still have the valve and nozzles, so where do you get replacements (checked Screwfix and toolstation) or have we move on since these ? Thanks

Standard close couple wc unbranded any recommendations on a seat I can pick up from either the merchants or Screwfix type places ? Thanks

Sorry not picked it up yet I only bought it as it had dropped to under £30 it says it is a R18ID2-0

Thanks for all your help I got stung years back with Marita copies and that’s why I am ditching the old dewalt 996 range and moving over to diy

Thanks I have an old dewalt set with 6 or seven tools but no batteries and now not working so only wanted a simple diy option

So just bought a bare ryobi impact driver and looking for a couple of batteries and a charger but unsure of which charger to go for the bay have loads of deals but don’t know which one to go for, any recommendations? Thanks

Will leave it up to them I assume as an electrician they will know as I said I don’t go near cu’s Thanks

Thanks everyone I tested the circuit and found the breaker for this cable it’s a 16a and the cable is a 1.5mm and only serving this cable, so terminal on the end taped up and breaker off and taped over and marked as such, I do simple wiring on lights and sockets but not at the cu so will see if...

Okay so if fitting in a back box with blank face plate do I strip the ends even If dead

Originally tested with a volt pen so it showed one set live and 5he others dead 5hen tested with a multimeter across live & neutrals and nothing. Then repeated with the live set and 242v so kept testing while switching mcb ( sorry don’t know what they are called) and then found the one that...

The live must go straight to the cu and I had a look at where the old hot water tank was but no ends there and nothing at the old room stat or pump, so when they changed the system to a combi they must have just cut the other ends. So I am left with these with the live on the connector block

Oops sorry thought these were up