Search results

Dan check out my advice to puller pal, your doing it wrong if you are removing half to all of the boiler to replace. Maybe stick to installing ?

Ok Dan from the Internet I'll pass on your strongly worded advice to them. Ta

Ok I ll tell em Dan s not happy and he wants it changing now

The trouble is Dan that a lot of engineers use the prv to drain down even though the drain off facility is there. The new compact has a prv at the front which is right next to the drain off . People still use the prv still. The mind boggles

Need to brush up on yer skills puller, big time. Various ways to change prv 1) remove pump, 10 secs. Undo plate 2 screws, reach in and remove prv 2) turn gas off, remove gas ISO valve. Pop your little hot dog holder in behind and remove. 3) boiler off wall takes no more than 25 mins Will pop...

Absolute drivel puller- expensive parts, total Shyte. Plus the old technology. Thought you were a good knowledgeable poster ?

I think that's a decent quote tbh, very professional

I have been to so many ufh problems fitted by builders who reckon they know what to do because they fitted it at theirs. Op you are right to want to get it spec d properly because if it doesn't work well this time next year it's an expensive job to put right I use wavin who have a design...

That's the he plus Worcester not compatible with external controls The Worcester tr2 roomstat is used with it- still available together with the text display that fits onto boiler

Hi, this isn't a fault, your boiler is working on weather compensation and the pump stays on. If it's annoying you can turn it off but then the weather comp isn't as accurate. I suggest you ring Worcester tech helpline, they will go through it and explain it a lot better than me. But don't...

If you go heat pump route the house needs to be mega insulated which may preclude the fitting / use of a wood burner. All that heat will disappear up the flue Ground source are excellent but high fitting costs, air source have advanced in the last few years and are much cheaper to fit now. You...

Razor good points well made

Interesting ..... Do inter gas give you an accounts mgr who helps you with your business ? Do inter gas have service engineers ? Do they advertise / market Are their parts expensive ( I know they never break down but just in case )

Dan they have free installation manuals on line, great tech open all hours, great after care service, if your wai , a manager who meets to help your business, great advertising , very Reliable, what's not to like baby Oh and the wb engineers turn up, next day and don't charge you for doing so...

Dan heard the same with broag, viessman and all the others. Wb will be around for years as will vailliant and Baxi all good brand names As west life once said " don't fight it "

You d fit an inter gas x 8 with low loss header and a sandwich box full of relays ! Be gone with you!

Tony if you read in the sun that aliens invaded London would you believe that pal ? Hope everything is going well

Razor I don't change wb hex that are blocked pal, fill with f3 close flow and return bulkheads then run dhw for 15 mins, bingo it's clean and no lock out

Agile is talking nonsense , Worcester will not invalidate your warranty, if anything they are a lot more forgiving than other manufacturers

I get the picture mustafa !