Search results

Can you add an extra seal...

If there is only one cable going to the final socket in the drawing then it is probably a radial. Could be spurred off the FCU for the boiler but shouldn't be.

Plasterers and diyers don't discrimate when they knock nails through cables, the op says it is not a new fault.

Can Triton offer any advice

I would guess in that case it needs to be knocked off and re-rendered with plenty of waterproofing added.

Penetrating damp may be the problem but sems excesive in the first pic. to be that if it's a cavity wall. I assume first pic is before roof repairs and third pic is now. If that is the case it may just need more time to dry out or there may be an obstruction in the cavity that is wicking water...

Do a google search for hhow to remove the cover, there is plenty of info that suggests you are trying to do it correctl but a couple of different versions of the fan.

can you repair it with one of these https://www.diy.com/departments/spares2go-stabiliser-valve-rubber-seal-for-triton-aquatronic-ivory-jade-rapide-zante-shower-40mm/5057817473645_BQ.prd

Bad connection of either the cable or the internal pin holders of the socket. Did he take it off and look at all or just say he would be back.

Have you read the instructions and tried it in different modes and have you ensured the water container is installed correctly. If yes to those questions then it would appear not to be working properly.

Can't really tell anything from your pic. but yes external door thesholds should have drainge holes to allow water to escape.

In your other post you have numbered the les's 6 to 9. The link I posted refers to them as 1 to 5. Which configeration that is shown in the 2 tables do you have. Horizontal or vertical. Posting a pic of the flsashing led's on the control panel might help.

https://www.toolstation.com/chuck-adaptor/p12358. and https://www.toolstation.com/locking-keyless-chuck/p71242

Seen any rats?

Same brand but no knurling. Cheaper and the ones I know and use https://www.toolstation.com/croydex-grab-rail/p66542 I'd also recommend using stainless steel fixings.

Yes that's the type I meant

Go for a polished stainless steel one.. The white painted ones rust eventually.

I am not an expert on dishwashers and Asshurs may see your post and give better advice, but a google search throws this up An F11 error on an Indesit dishwasher indicates a pump failure, meaning the dishwasher is having trouble draining or circulating water. The most common causes are a clogged...

https://indesitservice.co.uk/dishwasher-repair/error-codes

So your kitchen/diner is approx 6m x 4m. Personally I would be inclined to forget about the pendants altogether and just use downlighters symetrically placed across the ceiling. Draw a centre line both ways and configure the down lighters in rows approx metre apart both ways.You will need to...