Search results

Did not refuse. Just didn't have time to talk to them.

I was contacted since 3 years ago on a regular basis about changing the meter. So, they did contact in advance of the switch off. They may not necessarily have to tell you the exact details for the change because it would just create confusion for most people.

Alright then, they must have found some new valves from china. In that case, I will hold fire on requesting a meter change.

It wasn't useful to anyone. I don't use temu. Aliexpress is my go to.

Well, we are after the switch off deadline, and my lights, fridge, and computer are still working. That will do me for now. I will get the meter changed in a couple of months when I am less entangled with things. I assume I am now on peak rate 24/7. Low rate should be handy since I have to keep...

Is this "BBC long wave radio 4 transmitter" the RTS being turned off? If I look, I may be able to find a china valve for them. Honestly, I am not into electrics to understand what you are saying.

The hot water tank has immersion heater in it. But it is never used because the water and central heating are heated by gas. I am not sure if I have economy 7. When I send in the meter readings, I have NORMAL and LOW readings. The sticker on the RTS says GROUP 7. Is that economy 7?

I haven't replaced my meter yet. Does the RTS turn off at the end of June affect lights and sockets? I don't use electric for heating. Will the turn off just means I won't get the economy 7 off-peak rate, or does it mean I won't get any electricity whatsoever in the off-peak hours? Thanks.

So MK unscrewable doobries can be unscrewed? I misunderstand that it cannot be screwed, therefore there wouldn't be a need for unscrewing something that isn't screwed..

What exactly is an MK unscrewable doobries? This kind of heavy duty modding is the perfect excuse for the insurer to not pay when your house burns down.

The typical small shop that the insurer use for assessing accident damage/compliance wouldn't have this rig, though. Since there is E-mark on the bulb, they'd pass it without a second thought.

Don't try to change the subject. Which one did I paint, o'investigtor?

It just means I am skilled at painting bulbs. So, you can't tell which I painted?

You are wrong. How do you know I didn't paint one?

The first page shows various coloured bulbs, which one did I paint?

Go on then, explain.

How do you know the factory didn't paint it then?

I don't own one. Mine's a cheap new biqu from ebay. Came with a dodgy silicone heat bed wire directly from factory. Fixed it up with pvc wire and it will be good for life. I can block the manufacture's access to the printer if I need to. I have done that with windows for years, and not a single...

Water can still cross that joint. I am no merchant. 100% diyer or your money back.

You can absolutely wet nylon. Water can attach to small crevices in nylon as it can attach to anything else similarly structured. Go find a cord and get a drop of water on the top. The water will conduct all the way down.