Search results

You need to sort them all out and stack them flat. You will then have to glue the edges together as a lot of the locking system will be damaged. You will need a flat sub floor to put them over as well.

Treadaire chromium 9mm 180kd density.

Take all the scotia off and plinths off. Check that you have a 10mm gap everywhere. No wood can be touching any legs or skirting.

What wood is it ?

it’s the design.

And when you laminate moves you can do the silicone idea again each year.

Not sure what meter you are using but that’s not a correct reading. how long has the concrete been down ? If that doesn’t have a damp proof membrane under it you could apply a liquid Dpm to it.

Should have used 6mm or 9mm plywood. I’d overlay that 3mm with 6mm. Fibre screeds]ing compounds would need min 6mm underneath them.

Ardex A45 -

So it’s 3 rooms? Thought it was 1.

What is the prep ? Does it say. Is it one coat of screed Liquid Dpm ?

That must include the preparation of the sub floor.

See it all the time from lazy plumbers and sparks. We fix all floorboards before laying plywood or underlays.

30m2 was he including adhesive with that ? We would be about that with vat . Any prep work would be extra. Like liquid Dpm and any screeding.

So a fitter not a company gave you a written quote ? Did it say on it supply & fit ? Is it planks or herringbone?

Why not use quickstep impressive laminate. Will last years. Waterproof coating on top. Less prep is needed.

It’s 1-2 days work.

You sure it’s not supply & fit ? Labour on fitting amtico herringbone we charge £30m2 plus vat so approx £630 plus vat. Supplying amtico signature approx £1500 plus vat Adhesive £65 inc vat Prep depending but a normal 5mm smoothing compound £250 / £300 plus vat

LVT flooring is it ? Which one. What’s the preparation needed ?

We had a few of them type sub floors asphalted. We filled in the voids were the timber was with ardex na and a46 rapid and then got a 20mm of flooring grade asphalt. Very popular in the north west.