Search results

So what plumbing do i need to change here that is suitable?

Have you posted on houzz about betterkitchens?

I assumed thinner roller would give better finish with matt paints. I always used Dulux matt for ceilings myself, there is a super matt on the market apparently good.

You sure its a thicker roller you need? Also are the ceilings skimmed with new PB or Artex?

Can you live with it? It will drive you bonkers trying to get it right. I was up at 5am doing my ceilings to try and get them right before work etc lol. Light plays a big factor as well, I have paint in directions mostly only visible in real high intense sunlight. I used Harris fine finish...

Hi, I think with a new kitchen and ever increasing scale on my kettle I should get a water softener. I have the following pipework in the image here; I've read you need external to bypass the softener...and it may be best to have some hard water on at least one sink internally (this would be...

I used these to good effect https://www.amazon.co.uk/Axus-Décor-Finishing-Roller-Sleeve/dp/B00CST4SEU/ref=sr_1_3?keywords=mini+roller+axus&qid=1554200271&s=gateway&sr=8-3

I used these rollers to apply satinwood on my staircase. Finished really nice. https://www.amazon.co.uk/Axus-Décor-Finishing-Roller-Sleeve/dp/B00CST4SEU/ref=sr_1_3?keywords=mini+roller+axus&qid=1554200271&s=gateway&sr=8-3

After completing cabinet install i've had decent aftersales with Better Kitchens (so far). Although negatives; 1. Self assembled oven housing was 5 mm out on a draw underneath the oven slot, when opening to remove it appeared to had been drilled a few times to get right (apprentice work?) 2...

I'd want a backbox in there myself for completeness and peace of mind. Should he be using a chocbox as well?

I've decided to take off the Lino (Eek). Bought a Big Mutt today and that gets through the stuff but I need to catch the corner of the mutt to get under tiles and all its doing is cracking them not lifting them. I'll be doing this over several days I think ;) Will I get any issues if I leave...

Might have to go with strips option as the pelmet runs at a diagonal cut inside.

These are the ones im looking at, pelmet is 4CM for me. Not got a corniche so can't put tranny on top :)

Hi all, Looking at old school batons for under my cabs but getting OCD and want something less visible under the pelmets. With the strips where do you install your transformer?

I meant new skirting board is going in. Hit a snag though, I want to do my hallway all the way through as well, however in kitchen I've got Lino tiles glued down and in hallway its bear concrete (Vinyl sheet at the moment in hallway that was a temporary measure). What should I do here?

Skirting board on edge so can do this without big gaps visible!

No mate im north facing. It doesn't get hot my kitchen.

Got any previous to back this statement up? If i'm paying 30 quid a square meter and it dosn't specifically say this in the Product Instructions then i'm not bothered, it will be going back to the manufacture. Click is my only option to get decent flooring down tbh, not really up for...

Click option they do now, looking at a stone effect. https://www.amtico.com/flooring/products/product-search/SB5S6105/

Hi, Has anyone fitted this before ? Sample looks the same quality as Amtico but 35% cheaper, however amtico is thicker.