Search results

Great idea

I can get the sliding door out but I don't see how that will help me clean the mouldy mess between the fixed panel and bottom frame.

No. It's always been like that. Just the fixed glass panel sitting in the frame, with the frame behind it at the bottom. There's no sealant between the bottom edge of the frame and glass on the inside so soapy water gets in. It was like that when I moved in a year ago. Only just got to the top...

OK, thanks for the help. Looks like I'll have to live with it.

How might it be a disaster?

I'm not bothered about the mess. I'm only bothered about not breaking the glass.

I want to remove the fixed glass panel from this shower cubicle screen. The reason being to clean the unsightly mould between the glass and metal frame behind it. Whoever fitted it didn't think to seal between the glass and frame, so soapy water gets in and sits and goes mouldy. I thought by...

How much dismantling required?

I've tried all the filter and drain hose fixes avaliable online, but no joy. Any other advice to fix the E36 problem?

Thanks. I'll give it a go.

Why is it doing that?

My combi boiler is a Vokera Easi-Heat Plus. It's losing pressure when the heating is on but not when running hot water. The pressure drop doesn't affect the heating, ie the rads warm up and stay warm. I simply top up the pressure each time. What's the mostly likely cause of the pressure drop...

Yea it drains normally then stops at the level shown in the photo.

I don't fully understand this. What's the purpose of taping the overflow and what's the sponge if the overflow is sealed off?

What are the most likely causes of water remaining in the plug hole after the bath has drained and how to fix? This is a bath in a rented place and the recently replaced bath panel has been completely sealed with silicone, so looking for possible fixes that don't involve taking it off. The...

Thanks for the feedback. I can't afford to replace it just now, so I've had to bodge it more than the fitter. I'll make sure I get someone who knows what they are doing though, when I get round to replacing it.

Thought as much. My guess is it's a Howdens worktop because the kitchen appliances are from there. It was fitted about 6 or 7 years ago. Long before I moved in. I doubt they'll still be making it, so might have to replace the whole lot.

Hi. Are the any fixes for a swollen kitchen worktop? It's very close to the sink, as you can see from the photos, so keeping further water out is going to be very difficult. Could I cut out some of the core, apply sealant and clamp it down?

I'll let you know how it goes.

You're correct about the 3 T&E. The second switch is at the other end of the hallway. So I simply replace this switch with a 2-gang and wire as you've shown, with the other end of the new T&E running to the new wall mounted lamp. Correct?