Search results

Time to buy some HEX sockets.

I have just used my normal sockets until now they have been ok.

Perhaps it's time to invest in a jaw puller, suggestions not to expensive

Yep it's stuck fast, no way of removing yet and , it has belt drive. Ideas for removing this ?? As I don't have a puller.

Great That centre bolt is already loosen as is the other blade bolt. So will give this suggestion a try , Burnerman to the recuse again Thanks John.

IZY blade nut sized Please see picture of sized blade nut have sprayed with WD 40 left to soak, used a 14mm socket and the edgers burred off nut. Whats the next plan for me to remove this ?? Was thinking off gas gun to heat would this help ?? The other 2 nuts released no problem.

Just looked this mower up It costs a pretty penny see description on web This rugged mower is more than capable of tackling large, uneven lawns.

Will try both suggestions. Failing that there's a very strong looking builder next door doing work , will see what a mug of tea and a cake will do to get to put his might behind the beggar.

Remove Tap cartridge. Out Kitchen Hot tap requires the cartridge replacing Problem it's sized no mater how much I tried unable to release it, Would applying heat from gas gun or Electric heat gun help or is there another solution to this ?? The Cold undid no problem. Thanks

I will check the cheapest deck then make up my mind

The cost of a new deck is not for me, bit costly. Advice should Kurust treat the area then smooth Hammerite under & top of the deck ? Then pop rivet a pierce of thin alley over the area ? Should last longer than Duct tape.

We have Windows 10 on the computer Is it worth changing to Win11 ? Whats involved for a old novice

Black smoke: it was turned on its carb side by persons unknown ! , ran for 15 mins new air filter now starts first/second time drives up and down 30 yard lawn no problem. will look to see what a new deck would cost, I would then keep this as a second machine.

Now running sweet as a nut as they say. What silver paint would you suggest ? Is it worth putting Kurust on deck first ? I think I will go ahead and put a patch on the deck hole after cleaning off the rust bubbles. Don't think a new deck would be profiterole. mower ser No HRG 465C3 MADF...

Ideal Combi boilers said they could not help I would have thought with their products ans knowledge they should have known

mower ser No HRG 465C3 MADF 157857 18 ins black smoke has now stopped after a 15 min run must have been oil in cylinder, still shunts so will look at your suggestion Sat

When you say a few litres are we talking about 5 - 10 -15 ?

Anybody now has much water would be used from a combi to the shower 5 yard run of pipe before hot water comes out of shower? Looking at the cost wasted water as on meter and electric & gas to run. second Q would it be better to replace with Triton electric shower ? thanks for help.

Thanks John Good idea checking choke & throttle, paper filter took at the moment as the mower was put on its side oil was coming out of carb filter don't ask who put in on it's side.

Gave it a scrape off today wounding weather to pop rivet a patch over hole area. Also the old girl has stood for some time and is hunting a bit with a bit of black smoke occasionally am I looking at a carb strip ?