Search results

It's the default level that gets presented, not the only level available..... You can override this if your user has the appropriate permissions

OP, Set the default area of the keypad to C, assign all areas to the tag, Flexi-set set to no. Tag will arm and disarm area C all day long with just a swipe. If someone sets another area, the tag will still disarm the system. Tested here and it works. That sound what you're after?

I'm sure the OP will correct me if I am...

You haven't mentioned what panel it is, and whether it's level set or individual areas? Two things to try (not in front of my demo kit at the moment) - Assign A B and C to your tag but leave Flexi set off. With any luck it might just set the highest level it has assigned Failing that...

Strange that probably the most difficult battery (albeit the most power consuming device) has been replaced first! Anyway I'd replace the keyfob batteries as well as the batteries in all the PIR's, contacts etc. Managers code is different from engineers. The latter can perform lots of diagnostics.

Have any of the batteries been changed in those two years? Do you have the engineers code?

Entering your code / presenting your tag / pressing unlock on a keyfob should silence any beeps and display any issues on screen. If nothing is displayed, or it prompts you to set the system, it's not your alarm. High pitched sounds (ala chirps smoke detectors) in confined spaces can become...

Is the Alert LED flashing? If it's not then it's not your alarm. The enforcer doesn't chirp, it has a two double beeps that alternate slightly.

Ones a wireless panel, ones a wired panel - apples and oranges. That said, the software is very similar if not identical, and you can put a wired expander on the enforcer panel and a wireless expander on the Euro 46 and get the same end result. Yes, but it's different to the wired Deltabell...

Don't forget to factor in the purpose of your CCTV system. I'm assuming a two storey or higher building here. Be aware that mounting under the eaves will make it difficult to identify a person unless on the off chance they look towards camera. The steep angle would mean you'd get the top of the...

If you're getting that error message then the device is still on the system. Have you set the zone type to disabled?

What software version is the panel running? It's in the engineers menu. Only noticed the other day that the Enforcer f/w v10 now supports areas or levels!

I can't see any mention of costs on the Pyronix website so not sure. On the Texe you could fit both IP and GSM modules, the enforcer only has space for one.

The Pyronix and Texecom kit are both good, fairly straightforward to install, the latter good for large sites as it uses a mesh style network. I'd recommend reading the manual before installing so you understand the terminology. I've only experienced the Texecom app and honestly it's not...

Is it communicating with the panel correctly when activated? For the zone in question, what does it say in Engineer menu -> Diagnostics -> View inputs -> Wireless device status -> Signal strength -> Inputs? (Press the yes key during the countdown and activate the detector). What's the number...

If you're worried about the PIR false alarming, adjust the pulse count or swap for a dual tech. If you're worried about the shock false alarming, set to double Knock. Job done. The confirmation stuff is for sending a confirmed alarm to the monitoring station, which isn't applicable in your case.

I can't help you if I don't know what you're trying to achieve......

What's the reasoning behind wanting both detectors to activate before triggering an alarm?

Avoid silent first alarm. It gives Mr Burglar some extra time before the system goes into alarm. If you're going down the confirmed alarm route, you need to make sure the panel is setup correctly. There's a few other options that may need changing. Confirmation on entry (manual explains this)...

I have a GSM modem in my demo kit, will check the LED's tonight for you. As I said above though, Middle two orange = Good signal strength. Far right green pulsing = connecting to network. They shouldn't both be on. Have you tried a different sim? Tried removing the data connection to the...