Search results

I hear Yas about spots in a bathroom etc.. but what the woman wants, the woman gets. It's less headaches. I'm sure yous know yourselves lol

Here I have a 1.9sq ensuite. Changed ceiling rose to 4 x 10.5w Monza spot lights. Ip65. Drawing the diagram I have them 600mm each away from each wall. Looking at the diagram, I'm thinking maybe to much light in the centre. Would you install the similar to this or arranged differently.

Would this junction box be suitable for these wago connectors. Everything fits in and the lid closes however everything is very tight and it got me thinking of excess heat with all them wires jammed into this like this. 6 x1.5 cables. 5 is 2 core and earth, 1 is 3 core and earth.

I have a few meters of this cable. It's not black, grey, brown and earth. It's round cable rather than flat. Would I still be able to use this for the isolater pull cord then onto the extractor fan.

So of I do this, add the 3 core and earth( brown, black,blue, earth) from the switch to the wagos then to the mirror as shown, I can turn the mirror off and on from the switch aswell rather than just from the mirror.

I think I will keep it simple and have it done as it's on the diagram. I think I know what you mean but I need to see it as a diagram before I'd even consider doing it your way.

Maybe this is what they where on about in store. This rad is in my budget. Anything else in that color is difficult to get before xmass with them btus for my budget. If it was ok to use, I'd purchase it.

Is everything fine in the diagram.

It did get me thinking thou. Is it ok for twin and earth 1.5 for a mirror in bathroom.

I've been getting conflicting advice on towel rad for an ensuite. The ensuite is 1.9square x 2.5m high. Online I'm getting it's coming in at 1600btus for a bathroom thst size with one exterior block wall and a room above it. The ensuite has an insulated plasterboard ceiling also. In store...

This is for 4 new spots in an ensuite and adding a mirror light and an extractor fan with isolation switch in an ensuite revab. Is it possible to use a pull cord isolation inside on the ceiling in the ensuite rather than a switch on the outside. Forgot to write switch on the square box on the...

I have a Honda petrol generator for site work. Yesterday I was using it the whole day for the first time in over a year. It worked all day untill after 4pm then the 240 stoped working. This morning I tried it again and nothing. Opened it up and the earth wire was out of the back of the blue...

He was told about it. But after remeasuring with lase level, the floor is out 18mm, not 30! Be alot easier to take this out. I could lose a few mm where the opening is for the new enterance is into extension, slope it 7mm over 4m to the doorway into new room and lose another 7mm in that room...

Copper would always be the first priority however I know full houses plumbed in Plastic in for heating and other well over 20 years and never a leak. It does work. You will here stories of some fittings failing but if done correctly, there shouldn't be an issue.

Copper would always be the first priority however I know full houses plumbed in Plastic in for heating and other well over 20 years and never a leak. It does work. You will here stories of some fittings failing but if done correctly, there shouldn't be an issue.

Not where I am. 10 week delay in getting these doors and windows! I'll ring them tomorrow see what they can do but I can't see them fixing this by next week.

It's not the height I'm looking to make up. The door threshold is 30mm below what it should be. The double door was made to big by 30mm and if I keep the floor level as should be , then it's above the door threshold. In that room I could lose 15mm of a slope in 4m length and 15mm in the...

150mm . It's the finished floor level coming from existing house to the furthest away location of the new extension which has a double door is the issue. I can't see how insulation depth would effect this.

Been building an extension these last few months in different stages. Foundations where out 25mm over an 8.5m length which isn't much. The block layer was supposed to take this out in his beds of mortar which he didn't! The window supplier measured of the dpc level when he measured for the...

Yes I understand this. I did forget to mention the distance I have is 2.4m, insulation is 150mm with 75min of screed. That's 225mm height to play with for the fall. If I do get the fall, is it possible to connect it to a tee for the other toilet just before it leaves the exterior wall.