Search results

Ok, i installed the new tap, opened the isolators and this one does actually provide hot water. Once this one was installed i tried the problematic one and that one works too. I have even tried it first thing in the morning before anyting else was on and it actually heated up. The only thing...

Rigged this one up on some 40mm timber and it does actually hold. Thanks for all the help. One thing to note here, the instructions say to install the tails on the tap and then feed through the ring. This is not possible because the nut on the end of the tail will not allow this so you have to...

when we say fill a bucket, i this doesnt have to be gallons right, i do this for a litre or two litres, just time it

Ive not got the worktop yet but will rig something up to test, i have another thread running about no hot water at the mo but thats another story

Just out of interest on the Venturi side of things, this was definitely broken before and the symptom was the shower not getting any hot water. Currently the shower is still getting hot water, would this mean the the venturi is OK?

Yeah, so without using the stabiliser I have 10mm. That item 7 threads into the body of the tap but the 2 or 3 threads at the top which are larger. I am hoping that if I do it up tight enough it will stay put, this is a VERY heavy tap

Without the stabiliser but there is less than 10mm

Here are a couple of photos

Hi All I have a new tap that I need to install. It is a large KTAP3 which has something I have never seen before. Normally the taps I have seen in the past have a threaded rod which is screwed into the body of the tap and then this is tighter with a nut. This one has no red, it has a threaded...

Ill get a bucket and time it, i would suspect its lower in the new one but will check for sure

Just checked the boiler, does not go on when the tap is on. This one is approx 6m away from the one that does turn the boiler on. There is another tap going in about 2m from the original, I've just put the sink in but need to sort the tap out will be interesting to see if that triggers the...

Ive not checked the boiler firing up yet, I would guess that it doesn't though tbh

Funnily enough I had that exact part replaced about a year ago when there was no hot water in the shower. Shower is still working though/? Could it be the same thing?

New pipes are in plastic Flexes are 30cm I think I used Speedfit isolators which I do not believe are full bore (at least not marketed as such) Boiler is a Baxi 105e I think

PS this is a combi boiler

Hi I have recently built a kitchen and have extended the central heating into it and it works fine. The problem i have at the moment is the hot water to the taps. I extended the existing run from the existing kitchen (at the back of the house) to the extension and the hot water does not seem...

Many thanks, i will try that

Hi All In my kitchen i have an island and need to cut the lip off of a board but i cant work out how to do this so that it looks straight I have tried it with a jigsaw using a laminate blade but it wasnt entirely straight. I have a circular saw and a rail saw, i am guessing that the rail saw...

I have managed to get the extender working in the dining room on both bands but still cannot get the plug/socket one working. What I will try later will be to rename the SSID on the dining room one so that it matches the original one (minus the _EXT) - not too sure if this is possible on the...

Its the slim black one, the Sky Q ER115 i believe