Search results

I'd like to know what your insurance company says about that.

Front door should be entry/exit (final door) with Hall pir guard access. Don't know why he's used entry/exit 2. If the door was not opened and then closed then alarm would not set when using entry/exit, as the correct setting function has not been carried out correctly.

Impact SC W has same option to wire additional contact. Install heavy duty sealed contact or RS contact to gate and wire back to wireless device in IP rated plastic box.

Drill new pilot hole directly next to the 6mm hole.This may dislodge the broken bit,then redrill with larger size bit .

Check keypad is correctly fitted to wall.Check tamper microswitch has not been damaged on keypad pcb when unit was installed. Also suggest change batteries for new one's.

Control panel needs to be v4 or above..If not then firmware would need to be flashed. Press menu 4 on keypad will tell you panel version. You will need smartcom and set up Texecom cloud account Subscription is currently free,but may charge in future.

Best to pay for GPRS pyronix app fee. Pay as you go sims can has setup issues. Have you paid for you existing service? Failed to connect suggests that not live connection or not setup correctly. Uninstall app and then reinstall app and setup with app password and system ID.This information is...

Total power down system and Disconnect bell box if rings once powered down. Then if new system.

Possible fault power supply to DVR.

If you no longer pay a maintenance fee then ADT shut down the monitoring connection. This will cause a arc fail.

Do you have a live maintenance contract for your system with ADT

Google socket spacers,lot available to space off that socket.

You would be better off with a wired keypad straight swap to replace damaged one. You will need to learn the new wireless keypad on to your system .

What Texecom control panel do you have? Does to have ricochet expander/ wireless panel. Why have you purchased a wireless keypad to replace a wired keypad.

Pyronix smoke-we are wireless devices. Your system will require a wireless expander for these to work.You can purchase 12volt smoke detectors which can be wired to your alarm system.

From outside edge Blue = T Yellow = R Black = - Space /not used terminal Red = +

Your panel shows bell tamper and aux tamper linked out.The control panel tamper requires a link putting on the jumper next to the spring at top of pcb(tamper disabled). Make all zones as spare/not used.You should now have no faults on your system. Now set up your smartcom. There are plenty of...

Best thing to do is start from scratch. Link out bell tamper return on panel,put Jumper on control panel tamper.leave all zones as not used. Post photo of panel wiring. Have you registered with Texecom .

Faulty battery?

Have you set part set function from zone attributes for each device and not used Area A or Area B as part set-up