Search results

“Must” sums it up. It means it has to!

Pare the end with a Stanley knife.

:)Put a flat blade screwdriver under the cap and lever upwards whilst wiggling. Don’t waggle, just wiggle!

Give it a spray of wd40 and let it do it’s magic. Then some serious wiggling and pulling.

I can’t make out what that is a picture of!

Pop an Allen key in that thread and slacken it off. Pop the plug in first.

Wow, you learn something every day!

He was up against the wall a bit I suppose. No doubt you asked him for a quote. He allowed a day. There’s nothing wrong with foam in this situation although he’s not been very generous with it and a few battens slid in the back of those boards would be easy enough to do. Poor photos so cannot...

I will do it for £10.00 If you want it testing afterwards the price is £50.00 If you would like me to remove my shoes an extra £60.00 is payable. I will need accommodation whilst I’m there for my girlfriend and four kids my wife doesn’t know about. We’ll treat it as a holiday but I don’t mind...

You probably have a mixer or blending valve passing somewhere. What showers do you have and is there a blender on the bath supplies?

Mole grips are not the answer. I thought they had olives although I may be mistaken. If you’ve mashed them you may need new sensor tubes and olives/O rings. But be gentle.

Toilet has a leak into the pan. A slow one. Delayed action fill valve tops it up every now and then. 99%

Be quick. Not as much as you think! Use a pipe slice not a hacksaw. The bath towel is not to dry yourself off!

Compression or pushfit and a bath towel on a bin liner. Or solder if you want a difficult life. Don’t try to solder a cap without an open end. You’ll fail.

Air lock. Close all other radiators and it’ll more than likely sort itself out.

Not push fit and should be assembled. O ring compression seal.

Yes, hold the blade at 90 degrees and gently scrape. Don’t go mad with it.

Never said you did! X

It’ll shave if necessary.

A lot of people put the grab ring on the wrong way round and the pipe creeps out.