Search results

Hi guys, There is not section for Damp issues on this forum, so I decided to write here. Question 1) I need a proper survey done in my ground floor Victorian flat. I called a couple of companies who gave me absolutely different causes and quotes. I am looking for some independent surveyor who...

Hi guys, There is not section for Damp issues on this forum, so I decided to write here. I am sure that Pro painters/decorators know about damp a lot. Question 1) I need a proper survey done in my ground floor Victorian flat. I called a couple of companies who gave me absolutely different...

Hi All, Installed McAlpine Appliance Trap as suggested by Newboy. Fits perfectly fine, works fine. Thanks Newboy!

Thanks all for your help, I will try different suggested solutions and will report back shortly.

Thanks Rob, I did try unscrewing the 90 degree small elbow (marked on the picture below) from the self cutting appliance and the hose fits perfectly into the opening . My only concern is the reliability of this connection as there wont be any tightening (i.e. no jubilee clips or anything else)...

Thank you, will try that

Hi guys, I have a new washing machine which has a waste hose with the rubber end (i.e. no thread on it). Under the sink I have a washing machine waste inlet which has a thread (see picture). Can you please advice how do I connect this rubber end to the waste with thread? Do I need some sort of...

Hi guys, I have a big 3 unit Window to install (see picture) It comes with one big sill, i.e. three window units but the sill is one long unit. Normally, when I install a small window, I silicone and screw in the sill to the window before the installation. In this case it is a bit different...

Thanks guys, Yes it does include the couplers. Will use the bay pols screws

Hi Guys, I have a big window (see picture) consisting of three separate units. When I will be installing it, do I need to attach the middle panel to the side windows (red lines)? If I do need to do this, what is a the common way of doing this, bolting/screwing? Or just screwing all units into...

Hi, I mean sweating and condensation, i.e. any negative effects that occur over some time. Thanks,

Thanks for your response. The underlay has a papery base, it is similar to this one: http://www.carpet-underlay-shop.co.uk/ekmps/shops/countryhouse01/images/duralay-hallmark-supreme-10.96m2-from-3.45-per-m2-roll-size-square-metre-[2]-3090-p.jpg I will still use some newspapaer, thanks for...

Hi guys, I have a carpet and a foamy underlay that came with it. Can I lay it onto the Chip Wood floor boards on the first floor? I mean, is it Ok for the synthetic foamy (soft) carpet underlay to sit on top of the wooden floor (plywood, chip wood), will it not cause any sort of rot or...

Oh, I think i know what it is, it is 3 circuits in one track turned on and of separately.

Thanks! Sorry, one more question. What is the difference between 1 circuit and 3 circuit tracks?

Thanks for your answer

Hi, Thanks for the response It is going onto existing wiring, each box turns on separately from a two gang light switch. Do the tracks come with some sort of supply connection? I was under impression that a separate box needs to be purchased, something like "floating track power supply...

Can you help me please to identify what wil be needed from this page? http://www.tlc-direct.co.uk/Main_Index/Lighting_Menu_Index/Lighting_Track_and_Spots_Index/KB_Lighting_Track/index.html If I order the follwing: KB TRK2MW Mains Lighting Track - White - 2Mtr -...

Hi, It is in the UK. Thanks,