Search results

A lot of BBQing indeed, but I will use it as an outside cooker as well. During the summer when it is too hot to cook inside, an outside BBQ with a side burner works like a charm :-)

That is probably another question I will need to find out about :-) Is it possible to lay the pipe without connecting the grill now? Will I need a GasSafe certified professional when I will be connecting the actual grill to the pipe outlet in the garden?

Thanks, I am sure you can get them, worst case you can buy them from the US and pay £200 shipment cost.

Thanks Dan, what is this specific certificate called? WHat do I tell Gas Safe when I call them? Thanks,

Hi guys, Do you know if it is possible to bring the mains Gas pipe into the garden to use with the Natural Gas BBQ? What do regultions say about this? I am going to do some referbs in my house and can dig the concrete floor to lay the pipe from the gas meter into the garden. Will use a...

Thanks, I will do that. But wouldn't it tear apart somwhere else? As it will not have any space to relase the pressure?

Hi, Thanks for your reply. Yes, I can add some screws, just drive a few more screws into the plasterboard and joists?

Hi Guys, Plasterboard Ceiling in my rooms keeps cracking between the joints. I did try fixing it by adding the fiber joint tape and then plastering over with EasyFill. But over a year (SUmmer/Winter) it keeps cracking. Is there anything I can do to stop it from cracking? Thanks,

Hi Guys, I have an old plasterboard ceiling in the sitting room, want to repalce it with something modern and nice. Can you recommend please what can be used? Thanks,

Hi Guys, I need to sand wals in one room, can you recommend which sander should I buy? I need something that will do the job and will not be too expensive. Will somethig like "Black & Decker KA300" do the job? Also, do I need to buy special sanding sheets? Or can I just buy standard...

Just an update, The valve started working when I installed it into the tank. I had to submerge it for a few seconds after installing, and then it worked just fine. Not sure why, maybe it requires some water around the diafragm to start working, or maybe as it was mentioned it needs and...

So if I have a low water pressure, does it mean it may not even shut off? The toilet is on the first floor and I have the tank on the rooh, i.e. around 2 meter abowe the valve. Thanks,

Thanks all, I will try installing it into the tank tonight, to see if it shuts by the water level. Should it be shutting if I test it with the air? FOr example if I blow into the water inlet pipe and lift the float manually, should it be shutting? Does anybody know if Fluidmaster is...

I have bought a replacement fill valve today. And it is the same story! It does not stop, I have connected it to the water supply (have not installed inside the tank yet) and tried lifting the float manually, the water does not stop. I started doubting if I am doing something wrong, but I did...

Thanks guys, It is a new installation, so the valve is absolutely new (small Armitage SHanks). When I lift the float, the water float does not stop. I know a new valve is not expensive, but I am not sure it will help me, it may be a pressure or something else?

Hi guys, I have a toilet with a bottom inlet fill valve. The valve does not stop when the tank is full. I bough a servicing kit (Armitage Shanks/Ideal standard) but it made no difference. Any advice please? Could it be that the water pressure is too high? Or anything else? Thanks,

Thanks, can you recommend some decent supplier please

Hi guys, I want to get rid of my garden door and put a pvc window there, but I am struggling to find a window to size. The door gap is a 850mm wide but there are no 800-850mm wide windows on the market. Can you please recommend any alternative solution? Thanks,

Thanks guys, appreciate your help. I have replaced the transformer and it is working fine now, although if I reduce the number of bulbs to 2 it start flickering, so the minimum load also take place. Thanks all

Hi Guys, I have connected 4 x 12v 4W MR16 downlights and bulbs to a 12v transformer (60W), now I have some problems. 1) The lights are flickering very fast for the first 10-20 seconds but then stop doing this. 2) Then the light flicker froim time to time, maybe like 2-3 times a minute...