Search results

HI guys my linear 24 has a problem with the hot water. Basically the boiler fires up fine heats water but then after about 1min or so starts making a pretty awful noise and sometimes locks out with code 03 flashing. If i turn the temp down it doesnt do it and it does sound almost like the...

I cant find the part there anywhere either, maybe you cant buy it. Thanks anyway

Right I have the above dishwasher which has the problem that water was leaking into the underneath base which then i understand triggers some sort of overflow switch causing the pump to run constantly. I know exactly what the problem is and it would be so easy to fix the only prob being...

Yes I did think it would probably only be a temporary fix. At least it stops the wifes whinging at me for a while tho. Thanks again for all the advice

Oh cheers. Is it normal then for just the one line of holes to scale up

Well I took off heat exchanger and flushed it through and some black muck came out and so far boiler seems fine so thanks guys. But just another quiery, is it possible to turn the exchanger around so the top holes go at the bottom? The reason I say it is that one set of holes where all black...

Thanks mate i will start with that and hope its not the main heat exchanger

Turn on hot water and boiler fires up fine but after min or two starts making strange gurgling noises and flame goes out but boiler doesnt lockout, then noises stop and boiler fires up again and this cycle keeps repeating. After reading other posts seems to suggest Domestic Heat Exchanger is...

I dont think i explained it very well its not that valve its the one at the other end of the filling loop after the one with the hand lever.

Also if i unscrew the filling loop water used to run out of it even when i could close it.

I re filled the system went to close the valve and the bit you put the spanner on broke off so i cant close it now.

I need to order a valve for my linea only problem is the rubbish manual has 2 different diagrams which identify the valve differently. Underneath the boiler there is 2 similar valves one is the heating flow valve and the other is the heating return valve. The one i want is the 3 way valve which...

Actually my manual says and i quote "To lower the system pressure to the required value pull lever on the head of safety valve (22) " And part 22 on the diagram is the PRV Thats from the manual for my linea 24 Although i wont be following it from now on but solo has a point you cant lay...

cheers mate ill make sure i dont use it again it was just so quick and easy.

thanks guys ill have it sorted in no time im sure. :? :shock:

My linea 24 flashes error code 07. The manual defines this as : "primary thermistor open circuit" What on earth does that mean?

The prv was faulty tho it used to run out the pipe outside for a day or two after use taking the pressure down to 0 bar and i was also told it was faulty after its service. Also the only time ive ever used it was to drain the system to check the expansion vessel and when replacing the diaphram...

No the pressure from the hot taps is fine and it seems to do it more when the CH is on than the hot taps. Its only started doing this after i changed the flow diaphram. Have i forgotten to do something? Like i said it made some wierd noises at first like water rushing through the boiler and...

Hi i have a vokera linea 24 boiler thats given me so much grief. It used to always flash 04 fault but i changed the flow diaphram and also the prv as this used to let water out for a day or so after you ever used it. After doing this it at first made some wierd noises that sounded to me like air...