Search results

The loop is not required

That wont work Chris

Try bleeding the pump, large screw on the front just crack it open till water comes out you have air in the boiler

You probably have or had a room thermostat in the hall, that is why no TRV, if you want one you will have to replace the complete valve

Hardly a small job to do it correctly, especially with that boiler

Can you post a pic of the wiring at the boiler end please

simply no, not legally

yes but remember you will have to leave the ch on the prgrammer set to constantly on and let the hive take over

no either way round will work , and to reitterate DO NOT make any links

lots on ebay

Your boiler is resonating, it is still under warranty so get worcester out

https://www.manualslib.com/manual/944568/Alde-Compact-3000-92x.html?page=15

Well as you have found out, the EP range were sold as a wiring centre and programmer built in to one, if you want to replace with a modern unit tou will have to create a new wiring centre to accomodate the connections you wont be able to do it otherwise

Nope

Just post a pic of the wiring in the wiring centre then we will know what you have

Lube the O ring and apply PTFE to the threads

as @Madrab correctly says , you have a balancing issue, forget all the crap about changing boiler paramaters, water is like everything, it is lazy and will always travel the easiest path, so will happily circulate around the nearest small radiator than take the harder path to a large radiator...

PTFE will be cheaper

I think your blending valve is the problem, some do have filter screens, dont know that make but wouldnt do any harm to check, just close the blue handled valve and open a hot tap till the water stops and remove it and chech it to see

I know its not what you want to hear, but it is Salus, bin it and buy something decent, they are possibly the worst controls you could buy, they are absolutely dire