Search results

Never mind........... I'll get the supplier out to fit an isolator.

Can someone advise how to set the internal contractor to open on this meter please. I’ve checked all the literature and it tells me that it can be done but not how to do it. It’s a tri state device seemingly (Open/primed/closed) Any help appreciated. Cheers Lee

Thanks. I read the long discussion on this after the release of edition 18 and came to the same conclusion. Cheers

Might be a video in leading/trailing edge dimmers and their function with various brands of led lamps, I’d be interested in their behaviour with incandescent type bulbs as well…….. Found it……. Never mind P.S. I’ve not seen a scope like that since my days in training as a radar tech in the...

Hi all. I’m about to move house. It’s woefully short on sockets with every accessory being a single, and only 2 singles per room. I’m going to be doubling up some of the singles and installing new doubles in the same final circuit. When running cables in the ceiling/floor void does the 18th...

I was thinking about doing that but my service is with EE now. You just know I’m going to get we can’t help ping-pong between BT and EE….

Hi All, Can anyone identify the box in the picture please. The cover is somewhere over Scandinavia I think and would like to replace and protect the fibre cassette. Cheers Lee

I did a quick google search for mila spares/mila spring modules but didn't turn anything up. It might be worth taking the plate off to see if it's actually broken and do a search for door handle spring/cassette to see if you can find something that looks similar. Only sure way to sort it out is...

That sounds like the spring cassette has gone. Is this a pull up to lock, push down to open type affair? I've just replaced one on a pair of handles. Underneath that panel in the first picture I would expect you to find something that returns the handle to the horizontal position. It might be...

Thanks for all your suggestions guys. I got in touch with the manufacturer and it is indeed secured from the glass side...... I understand it's probably far more secure that way, but perhaps slightly over engineered. Cheers Lee

The more I look at it the more it appears you have to remove the glass to be able to get this off.

I just want to change the cylinder. I was going to take the drill through the PVC and expose the screw, that was right up to the point I hit metal. :)

should really have checked the forum rules, not been on for a while. Am I going to get spanked for posting rather than linking? I usually pay extra for that.

Hi All, I've had an issue with a now ex tenant, and am trying to replace locks in some french doors, rear entry (ooer vicar). The door appears to be a eurocell eurologik affair..............that's what it says on the tin anyway. I've removed all the latch hardware and am just left with the...

My landing has 2 lights fittings. And at the top of the stairs a double light switch, which would be really really simple were it not for the switch in the dining room which controls both lights regardless of state. The downstairs switch will make or break both lights regardless of the state...

It's an energy efficiency measure, by always using a cold feed manufacturers can accurately define the energy consumption of the machine. I think the hot water feed used to reduce cycle times but didn't actually much reduce energy consumption, and also limits your cold cycle ability. Sure...

My hovercraft is full of eels, and the hamsters are rebelling.

Story goes, when i bought this house the chimney breast had been removed up to the first floor, but under advice it has been removed up to loft level. Prior owners had ripped the floorboards up to rewire, and instead of replacing had just thrown some chipboard down on top, now i'm removin...

Number 1 Could be any number of things, could be a cam position sensor which is coming in and out of tolerance. Number 2 sounds very very much like your heater valve. Have a look here for the bit i'm talking about...