Search results

yes I find myself running up and down the stairs a few times when I need to top up the pressure. I'm still waiting for engineer to come round :cry:

well it shouldn't be - the old filling loop should have been capped off. Didn't have an old filling loop?!? will ask why he put it upstairs in the airing cupboard.

Thank you kevindgas for the extra tip, I pressed the - button and its reads 2.1 bar, is that ok? The tap for increasing the pressure is in the airing cupboard next to water cylinder.

My original roomstat is over 20 yrs old knowing my luck its probably a 2 wire one. Does new cable mean making a big hole in the wall? is it a straight forward job? I'm looking at the Honeywell DT200 roomstat, a nice simple one...

hi! Hugh thanks for answering my Q's. I am definately not technical, not in plumbing and heating but ok in putting together flat packs :lol: I was deciding on having a digital one but was told it needed to be connected to the boiler as well so will cost me over £150+, or did the engineer...

roomstat is the original one from back then. No thermostat valve fitted on radiator in the hallway. I'm a bit confused, the roomstat is fitted in the hallway right opposite the front door which is the coldest part of the house. shouldn't the boiler be firing up quite frequently. The hallway...

hey! Hugh thanks for the helpful info. I have a traditional central heating system with a hot water storage tank, so its still fine to do without the small tank. I don't have numbers on the gauge just a light grey, dark grey and red area on gauge, was told its ok if needle stayed in the dark...

thank you will tell engineer to check stat. Also I have a few other Q's 1. when I had boiler installed the engineer removed the smaller tank from the attic, can you tell me why I don't need it. 2. cannot turn down two radiators using TRV. Is it because its stuck!

Hi! I need some advice before I call the engineer out. I had the above boiler installed last year november. About 3 months later I noticed the boiler was taking too long to fire up when the temp had dropped. There's no problem when you switch the heating on for the first 2 hours or so, rads...