Search results

Ok, let me get that for you now.

Just for your reference, the keypad says 'Tamper on Input' if that helps?

Mmm... So can I place the red and black to Auxiliary 12v power on the panel as I didn't know which connections I would put the red and black on the board as they are marked (Input 1) A and T?

This is a picture of the options listed on the instructions and I'm going to post a picture of the option I have used which is showing a fault.

Hard wiring the pir.

Last but not least, the Pyronix OctopusDQ wiring onto panel and 360 PIR including where to place the jumpers on the 360PIR? Many thanks in advance.

Bingo, perfect!

Here is a picture of the Euro 46 board and the magnetic door contact. So it's showing a fault on the keypad with this config. Can you help with the right configuration? Many thanks in advance.

91748D6D-3CC9-4BED-9B9D-C51AAA31641C by Tony-911 posted 19 Nov 2021 at 9:23 AM26E563D0-9581-4A23-AF95-CA6A715F0762 by Tony-911 posted 19 Nov 2021 at 9:23 AM

Door Contact

Pyronix 46 board connections

Wiring

New system, when I built the house I ran all the cables and it wasn’t my intention to have a bell as the house is in the middle of nowhere, I am using the app to get notifications. So it would be EOL and T-Com and then would a resistor be required at the contact?

Yes, that’s right. Many thanks for your help. Next problem (only two left) door contact switch. Do I require to use resistors on this and if so where do they go and what do I place the wires onto the panel? T-Com and T-1???

Many thanks Handymanjo! I do understand where your coming from, however, in my system when the wireless bell micro switch is correctly fitted SAB fault still shows. I have now fixed this fault, here’s how for anyone else facing this problem. When you install a wireless bell to a Euro46 panel...

The keypad displayed ‘Control Panel SAB Tamper’ The wireless siren has not been installed yeah, however, programmed. I have taped the micro switch shut and also tried opening and it provides a different fault code, so I know it’s not that. Could it be that where the wired bell is attached to...

Hi, could anyone be so kind to tell me how to fix a SEB Tamper? This alarm will not set as it sees this tamper. I think it might relate to a siren, however, I have checked the micro switch on the siren and it triggers the alarm. I may be on the wrong track. Any help would be welcome.