Search results

Hi Thanks for that, Just the internal flush bit .

Hi Thanks for your reply, so part of the flush valve will not un-hitch from the bottom ?.

Hi Can anyone tell me if I can replace the flush without removing the Toilet, there seems to be some connection near the bottom that looks as if it will twist to unlock, but also I don't know what type to get to replace if it will come off !. cheers Spike

Who said I am not listening, if you could just read my last post and comment pls , then I will not bother you anymore .

Pic of main Fuse Board

OK let me say it now what is intend to be done , then that will be the end of this . Wanting to fit a Sunbed it has 40 tubes and the load will be 6700kw, I have a 80A supply, that supply comes from a 3 phase 80A delay RCD, feeding a 80A Main fuse box pictured , that will feed the 63A RCD / 45A...

No cable is concealed !, it is clamped along the inside top of the wall of the building , load is 6700kw which is around 30A , I would of thought 6mm2 would of been ok ! .

Yes it is the case, I don't know why you are not believing that this is, it is a second hand bed for us as a family to use, the Farm might be a commercial entity, but this is not connected to the Farm business, how could it be !, it is not making money for us !.

Change of use for what, it is going into our Gym room, it is for the family only, don't understand what you are saying

So can I start again ! . There is no manufactures instalation instructions . Lets assume I am not fitting the Sunbed , but need to purchase the items for a competent person to wire up the Bed, so the question will be what equipent will I need to purchase for the competent person to wire up this...

No it is not a commercial venture, we have purchased this second hand for our own use

Yes understand that, will get a 100mA if I can find one, can't see it been a risk using a 30mA , other than it will keep tripping if the leakage is as they say, read on this same forum posts fro 2018, where Electrcians are saying they put in 30mA RCD's and they have never had a problem with them...

This is what I am thinking of putting in .

Yes there is large fan above it, why is this post now getting so complicated, there is not much difference in wiring this up as there is in wiring up a 8KW shower !. Spike

Not going into a House , will be in a room within the Farm buildings !

Yes sorry, meant the RCD has to have a 100mA trip , not the 45A MCB, I did say that it my first post !

Have decided it is not going to be within the house cicuit ( Blue phase) , am taking a feed from one of the phases ( Yellow phase ) in another part of the farm building, and putting it in a room within the farm building, where we have set up has a training/weight lifting etc room , the 3 phase...

I think also you are not supposed to be inside for more 3 mins at a time, it is on a timer , you have to put tokens in to start it up ! .

There is also quite a large fan on top of the unit , not sure has yet what the load of that is .

Mine has 40 tubes