Search results

Ahh! Okay, got that one wrong, seem to have attached the cold feed to the hot connector on the tap (and vice versa obviously) Now, please don't mock, would that result in the problem that I'm experiencing??

Well, like it says on the tin, I've just fitted a new kitchen mixer tap with the pull out nozzle/hose. It's the type with the central lever right for hot, left for cold, pull forward to turn on. It replaced an old mixer which worked just fine. All I did was turn the hot and cold water off at...

yes, you're right it does have 2 lamps, I know just what to do now, many thanks

Thanks, that makes sense Both neutrals in the one connector and both lives in one connector then just join them up like to like...perfect!

Hi From the roof I have 3 wires: Red (live) Black (Neutral) Yellow/Green (Earth) My new light fitting has a 4-way connection block Connector 1 has earth (yellow/green) Then there are 2 white cables each with one live (brown) and one blue (neutral) wire coming out of them...

Okay, obvious typo, 2.4cm not 2.4 mm.....doh!

Hi I think this goes here rather than doors/windows? Anyway We have fitted wardrobes where the openings have 2 doors hinged in the middle then 'fold' open to one side (if that makes any sense!) The fixings which fitted into the top/bottom corners of the doors are basically shot, the...

Yes, it's finished with the wee stones, what I've always understood as harling? I don't think I'lll get an exact match but I'll get the closest I can then basically chuck them at the wet render with a tarp underneath?

That's really helpful, thanks for getting back to me.

Hi there We have a single garage which seems to be a concrete block construction (the blocks even on the inside are a bit 'crumbly' so I'm guessing low density) with rendering/harling on the ouside, down to about 18 inches of brick at the bottom. The rendering has cracked and fallen off...