Search results

  1. V

    Fuse spur to single socket

    Yep that one is for the boiler with flex showing,and no there’s no sockets over that side of the kitchen.
  2. V

    Fuse spur to single socket

    Just the freezer that’s plugged in.socket would be to just use for toaster or charging phones etc.
  3. V

    Fuse spur to single socket

    Hi folks.can someone tell me if it’s ok to change this spur to a single socket?the spur is above worktop which isolates the socket underneath.
  4. V

    Render repair

    Hi folks,what type of render is this,and what will I need to repair it?
  5. V

    Ceiling membrane

    Hi folks,just fitted pir insulation board to my garage ceiling,and my question is,will I need any kind of membrane over this?I’ve been told if fit osb board,I shouldn’t need it.is this correct.all 16 joist runs a are vented both sides aswell for airflow.
  6. V

    Garage electrical testing

    Ok thanks mate
  7. V

    Garage electrical testing

    Hi folks,just want some advice on my garage electrical testing please.just built a detached garage,and run my 10mm swa cable into the garage from the house.sparky came down yesterday to quote me,and he said he will connect house cu and the garage cu,and give me an electrical test...
  8. V

    Render grit

    Hi folks,where can I get these small bricks from?
  9. V

    Garage rendering mix

    Hi folks,just about ready to render my concrete block garage now,so need to know what the best mix ratio is.its sand/cement render by the way.ive heard I don’t really need lime,is this correct?
  10. V

    EPDM edging

    Turn it upside down and it’s pretty similar to the proper trim anyway.
  11. V

    Epdm contact adhesive

    Ain’t got one mate,I bought it unused off marketplace.
  12. V

    EPDM edging

    I have actually thought about using facia board on mine with a bead of sealer underneath.
  13. V

    Epdm contact adhesive

    Hi folks,can I just use normal Vostok contact adhesive around the edge of an epdm roof?
  14. V

    Macallister sliding chop saw

    Hi folks.i have the above saw but need a new armature for it,as the worm gear has stripped.anyone know where i can get one pretty cheap.seen a couple on aliexpress which look the same as mine but the measurements are a bit different.
  15. V

    Roof rafter spacing

  16. V

    Roof rafter spacing

    Thanks peeps for your input.just gonna go 400mm spacing I think with 18mm osb.only a garage at the end of the day‍♂️
  17. V

    Roof rafter spacing

    It’s a flat roof with a slope.c24 joists.
  18. V

    Roof rafter spacing

    Evening folks.would 600mm centres be ok for a garage roof,4m span with 8x2 rafters.
  19. V

    Hybrid roof

    Hi folks,am I right in saying the only difference between a cold roof and hybrid roof is just the positioning of the insulation.also could you use dpm for the roof membrane or has it got to be breathable?
  20. V

    Gas pipe ventilation

    Ok,cheers.so would I use one big vent or a few smaller ones.
Back
Top