Search results

  1. G

    PowerMax 140 Locked out light

    More likely electrodes have opened up or Gas valve then maybe pcb :? none of which you can check yourself :x
  2. G

    RANGE POWERMAX 155X POTTERTON CLOCK / TIMER PROBLEM

    you wouldnt be shes not in Planning anymore :roll:
  3. G

    RANGE POWERMAX 155X POTTERTON CLOCK / TIMER PROBLEM

    true where you based :? baxpoti
  4. G

    Baxi 105e Instant

    there is a jumper on pcb that could be removed to stop the preheat working cant remember which one of the top of my head but will get back to you :D also its the central heating thermistor that controls the preheat temperature as its the central heating water thats stored in the expansion...
  5. G

    RANGE POWERMAX 155X POTTERTON CLOCK / TIMER PROBLEM

    Still works if you hold all of them in :)
  6. G

    RANGE POWERMAX 155X POTTERTON CLOCK / TIMER PROBLEM

    not the easiest as the surround around them has to come out at an angle bit of a puzzle the first time you do one but doddle the next ? :?
  7. G

    RANGE POWERMAX 155X POTTERTON CLOCK / TIMER PROBLEM

    not the best clocks in the world you answered your own question model number is p458 :D i doubt if it works but you could try reseting the clock by holding all the buttons in together for about 5 secs :?
  8. G

    BAXI COMBI PRESSURE PROBLEMS

    you have a leak somewhere :? check the overflow out of the back of the boiler and report back :wink:
  9. G

    pluming

    thanx for that Paul :)
  10. G

    Potterton Puma 80

    strange i dont know too much about prices as i never have to buy any parts :P but i know you cant use a 100 on a 80 as the screws dont line up (tried it in desperation ) :roll: its nice when were all friendly dont you think season of good will and all that :D
  11. G

    Potterton Puma 80

    Agreed but wot extra does it need to do ? apart from run the fan at low speed :?
  12. G

    Potterton Puma 80

    the simple answer is that the boards are designed and mass produced with alot of extra resistors and cicuitry which is never used but it is apparently cheaper to leave them on than redisign the pcb without them ! i dont understand the logic behind that one myself but its the same with alot of...
  13. G

    Baxi Solo 2 40PF pilot light out

    Welcome Baxpoti :) wot area you in :?: FSM :?:
  14. G

    Potterton Puma 80

    check it hasnt melted the platic connector as well :?
  15. G

    Potterton Powermax 150HE

    wish i had one as i got a right ear full when i had to turn some ladies heating off because a previous engineer not a potterton one had broken the bolt and i couldnt do anything but turn it off and label it as per our recent memo !
  16. G

    Potterton Powermax 150HE

    i would look to see if your system is so large that it needs an external expansion vesel ! as the built in one on the powermax can only cope with a maximum amount of rads !
  17. G

    Baxi 105e. Heating a bit then cant be bothered!

    check filter in return pipe ! its in the isolating valve
  18. G

    Potterton Suprima 50L.

    wot you have to buy 2 :? how do you know that anyway ?
  19. G

    POTTERTON PUMA 100

    and then when it heats up it rises to more than 3 bar and blows the prv brilliant :?
  20. G

    Range Powermax 155x

    it will if it falls below 0.5 bar ! a good service normally sorts this problem out with electrodes being the most likely problem :wink:
Back
Top