Search results

I found out the address is at the bottom so you do not need to replace the whole unit. I will try swapping just the top with another head and if this one works then it is a faulty head.

I have an error on my panel Protec 6500. I traced this to a smoke head that is not flashing. Protec said called out fee is £650 per day but might be less!! I am wondering can I twist this off and re sit it and check the cables underneath? Also If I need to change this sounder I can buy one of...

Sorry I worked it out!

I am too close to the bath waste here as the elbow goes further than the waste and I have no move on the vertical waste pipe to move backwards. What do I do?

I put in the middle and buy a spare one for the next 10 years!

I want to install a shower rail above the bath. The vertical grout line I want to install the screws on is slightly off centred to the right. 1. I have two options, forget the grout line and fit the rail centre ro the bath tab or 2. Install the rail on the grout line and move the adjustable...

I'm sorting the electrics tonight, putting these into trunking

The agency asked me to box this up for a rental. How do you do that so you still keep access to the boiler cover and also allow for the little valve underneath the boiler to fill the boiler !

I installed this telescopic hob extractor and although a recirculation I am a bit concerned with the hot air that will be coming out of it. Usual with a chimney type the air is recirculated and gets directed at the front of the hood. Now with this what do I do if I leave it like this and...

I am installing a retractable one like this one: So I guess I will install it at kind of pass my head level! I am 1.72m...so that distance from the floor!

On of the stair steps collapsed, I found out a piced of wood that held it in place had been like paper. It was the original wood from 1906!. How do you fix it as it is the second step and have not great deal of access. I am thinking to compact some sand at the bottom with mortar and add bricks...

it’s a bosch

I’m wondering what height do you install the cooker hood from the top of a ceramic electric hob? The manual says 450mm for an electric hob but I find this far too low. Even 650mm feels low. What height do you use?

Ok I see it’s got a black lever and when you turn it it does nothing. I presume you need a radiator key in order to drain it so you turn the black lever into on position and then you turn the little screw with the radiator key?

I need to drain the system on my BAXI 830 as my plumber has passed a pipe through the wrong side of a kitchen leg. He has not fitted any drain valves on the radiators. Does the BAXI 830 has a drain hose attachment? This is the back of it.

Sorry one more thing, I asked him why he did not do the insulation resistance test as some of you suggested and he said because he has to disconnect almost all the lightings and fittings and boiler etc in order to do that and as this was a fairly recent installation he did not feel he needed to...

Hahaha!!!

THE BIG REVEAL! The electrician came back today and he said he put one of the neutrals in the wrong RCD bars! 1 minute fix. All good.

Yes but he is coming on Saturday to check.

UPDATE: I've got the feeling the wires were not connected properly after the EICR. I made a video of the fault. The two RCDs work fine on their own but they seem to trip when both are on without anything plugged in. The external socket seems dry. Also On the left RCD that does the downstairs...