Search results

Thanks to all for your suggestion's i will try them all and see which works the best. cheers Tommy. :roll:

hi i have a multi fuel stove and when opening and closing the doors they make a squeeking noise,i know i can not put grease or oil on because of the heat but would like to know if there is anything out there i could use to get rid of this squeeking. cheers tom. :roll:

thanks noseall, i forgot to say it is on the outside reveal,do you think i could the same but use mortar instead. thanks tom. :roll:

hi i have had new windows fitted and when the old windows were removed it left some damage to the reveal round the windows,which was filled with mortar which fell out so i tryed and the same happen again,i have tryed wetting the area and using upva and with no success.i have notice that there is...

foxhole it does not rain all of the time in wales just most of the time. :roll:

hi john thanks for your help,taped plastic to wall floor but no moisture from floor side or wall side of the plastic so its just in the air so we will just keep the room aired and warm as we can.by the way the bathroom is vented by way of extractor. cheers john. :roll:

thanks JohnD we actually live in a bunglow and have concrete floors,and the walls are insulated,we have borrowed a dehumidify and we are collecting about half a pint every two hours or so out of the bedroom,but am i right in thinking that the dehumidify will just keep on collecting water as...

hi we have a grey coloured mould on the insides of are bedside draws and on the wooden bed slats under the mattress,it was wash of with soap and water spring this year but is back agian.we do have the window on night vent and open during the day.can anyone tell me is it possible to get rid of...

hi i am about to do some pipe work in the kitchen,is it to be copper compression or pushfit??. :roll: p.s.is copper pushfit any good?

thanks everybody for your answers. cheers tommythefox. :roll:

hi when cutting the sink hole in a laminate worktop,do you cut from the laminate side or turn it over and cut from under side. cheers tomthefox :roll:

Hi its proberbly late in the day but on the link below there is some imformation on your problem with central locking, the answer from danielg 4455 looks intresting. :roll:i I have a problem with my central locking using the remote control in the key. some times it will open other times I have...

Hi i am putting a washing machine in the garage but i will have to have a 5 metre run of waste pipe,can anyone tell me is there going to be any problems with having a waste pipe of this length,i am using 38mm pipe any advice would be welcome. cheers. :roll:

hi gman 76,its not a zetec only a Lx :roll:

hi i have a ford focus 16v 1600cc 100 55 plate,can anybody tell me does it have a belt driven camshaft or a chain driven camshaft. cheers. :roll:

hi everybody,thanks for all your input,but i think i will call in the profesional's if i can find one,and get it all check out and like spark123 says get a new cu with rcd which will cover the plugs.and by the way just to clear things up regards the rcd it has a test botton with the word test on...

hi all we only move in 18 months ago so its unkown whats what. bas, the rcd warning notice is for the rcd for the shower with earths in the choc-block, spark123 it is a 60a cu can you tell me what could be the outcome of a 40a mcb and in the lefthand side fo this cu,by the way it is for the...

hi bas, here are the pictures of fuse boxes ,the isolation box grey top right is 20 amp,the fed for garage comes from the fuse box below and out through the grey isolation box to garage. cable looks like at lease 2.5 twin-earth. :roll:

hi bas, the garage is detached from the house,the power supply to the garage is from a fusebox in the house. :roll:

hi M t e iwill be using the sockets for washing machine,tumble dryer,fridgefreezer and when i am using electric drill etc. :roll: