Search results

Latest pics

What happens if there is no gap?

Think the full span off the loft is about 6.5m and it's roughly half way so roughly 3.25m.

Is this good or bad? Noseall

Jerry M not sure about the question on the insulation. It's 75mm thick and it's directly onto roof felt then hardboard nailed on to it then taped gaps with foil tape. That part is just made for storage. The main room gonna use kingspan. Under the floor there has been chicken wire over the joists...

Thanks for taking your time to post shy. Yes it's over a internal support wall. The pic with the wall behind it. The other side is sitting on a beam thats on the support wall and the chimney breast. I left the steel to my mate. So couldn't answer anything else on them. He does quite a few loft's...

Next week will have rest of floor in also getting velux's fitted. And hopefully strairs will be made and fitted post some more pics next week.

Had to knock airing cupboard down to get steel's in.

Update on loft so far

Supply to immersion was only 2.5 so electrician is running totally new supply from meter. Cheers for all your help. :wink:

Havn't been on all week follow this link to worcester website and download instructions for your clock it looks like the DT20 http://www.worcester-bosch.co.uk/installer/literature/gas-boiler-literature/greenstar-28i-junior-literature

Span Although I'm in the gas industry and it's in my best interest for people to change there boiler every 15yrs or so you have probably hit the nail on the head with the design for profit line. Also the gov have signed up to the treaty that says it will reduce fuel usage and who's gonna pick...

The run from CU to end of sockets would be about 20m, say GF 3m 1st floor 3m then plus 4m along then 10m around loft say about 10m insulated.

I've checked the fuse at the board and it's on 15amp it's on it's own. So if it 4mm or bigger that's fine to use i'm getting an electrician to do it just would have needed him earlier in the project to run fresh cable from meter.

No en suite just a bedroom, will have radiators so no heavy elec stuff like heater's.

Ok your right it's aluminium but how does that help the OP, try helping him I don't need your advise seen a lot of your comments and you seem to be quite patronizing. Just doing a bit of karma after getting some advise for me loft conversion. Can you add any helpful advise to this poor chap who...

Difference in gas usage per year in £'s is about £30 per year so 10 yrs is £300, is the cost of the boiler that much extra? Are you "Green"? Your boiler won't be obsolete in April whatever one you buy, Manufacturers stop making parts for boilers when it's no longer profitable. Still get parts...

Make sure manufacturers instructions let you have a sealed system on your boiler also. Deffo don't seal it if it hasn't got a over heat stat.